added aerc config, added nvim plugins surround, markdown etc

aerc/.config/aerc/accounts.conf

@@ -0,0 +1,22 @@
+[phil@liphlink.xyz]
+source = imaps://phil%40liphlink.xyz:Fqi5UAyr46e69fG@mail-server.lynx-piano.ts.net:993
+outgoing = smtp://phil%40liphlink.xyz:Fqi5UAyr46e69fG@mail-server.lynx-piano.ts.net:587
+default = INBOX
+from = Phil <phil@liphlink.xyz>
+copy-to = Sent
+archive = Archive
+postpone = Drafts
+folders-sort = INBOX,Draftr,Sent,Archive,Spam,Trash
+aliases = pw@liphlink.xyz,p.waibel@liphlink.xyz,philipp.waibel@liphlink.xyz
+
+
+[spam@liphlink.xyz]
+ source = imaps://spam%40liphlink.xyz:ANZ6JJPBiB7k1c7k@mail-server.lynx-piano.ts.net:993
+ outgoing = smtp://spam%40liphlink.xyz:ANZ6JJPBiB7k1c7k@mail-server.lynx-piano.ts.net:587
+ default = INBOX
+ from = Liph <spam@liphlink.xyz>
+ copy-to = Sent
+ archive = Archive
+ postpone = Drafts
+ folders-sort = INBOX,Drafts,Sent,Archive,Spam,Trash
+ aliases = blue@liphlink.xyz,red@liphlink.xyz

aerc/.config/aerc/aerc.conf

@@ -0,0 +1,890 @@
+#
+# aerc main configuration
+
+[general]
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+unsafe-accounts-conf=false
+index-format=notmuch://~/.local/share/mail
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+#index-columns=flags:4,name<20%,subject,date>=
+border-char-vertical="│"
+border-char-horizontal="─"
+styleset-name=catppuccin-mocha
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+sidebar-width=22
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+#dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+sort = -r date
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+# pager=less -Rc
+pager=cat
+html-unsafe-images=false
+html-filter=dante
+image/*=chafa -f kitty -s ${width}x${height}
+text/html=dante
+application/pdf=zathura
+video/*=mpv
+header-layout=From,To,Subject,Date
+
+
+#w3m -dump -T text/html -o display_link_number=1
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+editor=nvim  # or your preferred editor
+address-book-cmd=abook --mutt-query '%s'
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+edit-headers=true
+
+#
+# Sets focus to the email body when the composer window opens.
+#
+# Default: false
+#focus-body=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurrence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+text/plain=sed 's/^$//'
+
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+#text/html=pandoc -f html -t plain | colorize
+text/html=! html
+text/html=! w3m -T text/html -I UTF-8
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+# text/html=librewolf
+x-scheme-handler/http=librewolf
+x-scheme-handler/https=librewolf
+
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+
+###
+new-message=new-msg
+quoted-reply=reply-quoted
+
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+template-dirs=${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

aerc/.config/aerc/binds.conf

@@ -0,0 +1,236 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+\[t = :prev-tab<Enter>
+\]t = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+# Switch between Adresses
+,1 = :change-tab phil@liphlink.xyz<Enter>
+,2 = :change-tab spam@liphlink.xyz<Enter>
+
+# Delete = move to Trash (syncs with ProtonMail)
+d = :move Trash<enter>
+
+#d = :move Trash<Enter>
+D = :delete<Enter>
+
+# Archive
+a = :archive flat<Enter>
+
+# Quick folder navigation
+,i = :cf Inbox<Enter>
+,u = :cf Unread<Enter>
+,n = :cf Newsletters<Enter>
+,f = :cf Finance<Enter>
+,s = :cf Shopping<Enter>
+,t = :cf Travel<Enter>
+,d = :cf Development<Enter>
+,x = :cf Spam<Enter>
+,tr = :cf Trash<Enter>
+,a = :cf All Mail<Enter>
+
+o1 = :compose -H "From: Liph \<liiph@proton.me\>"<enter>
+o2 = :compose -H "From: Liph \<liiph@protonmail.com\>"<enter>
+o3 = :compose -H "From: Liph \<liiph@pm.me\>"<enter>
+o4 = :compose -H "From: Philipp Waibel \<ph.waibel@proton.me\>"<enter>
+o5 = :compose -H "From: P.Waibel \<ph.waibel@pm.me\>"<enter>
+
+# Delete and sync
+#d = :modify-labels +trash -inbox<Enter>:archive flat<Enter>
+#d = :modify-labels +deleted -inbox<Enter>
+#d = :modify-labels +deleted -inbox<Enter>
+#d = :move Trash<Enter>:exec mbsync -a && notmuch new<Enter>
+# Permanently delete (Shift+D)
+#D = :prompt 'Really delete?' :move Trash<Enter>
+
+#B = :compose -H "From: waibel ph.waibel@proton.me"<Enter>
+# for url handling
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+<C-Down> = :next-folder<Enter>
+K = :prev-folder<Enter>
+<C-Up> = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+<C-Left> = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<C-Right> = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+zM = :fold -a<Enter>
+zR = :unfold -a<Enter>
+<tab> = :fold -t<Enter>
+
+zz = :align center<Enter>
+zt = :align top<Enter>
+zb = :align bottom<Enter>
+
+<Enter> = :view<Enter>
+#d = :choose -o y 'Really delete this message' delete-message<Enter>
+#D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+C = :compose<Enter>
+m = :compose<Enter>
+
+b = :bounce<space>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+
+,l = :pipe urlscan<Enter>
+
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+
+# Insert signatures with Ctrl+s + number
+<C-s>1 = :exec cat /home/liph/.config/aerc/sigs/formal.txt<Enter>
+<C-s>2 = :read ~/.config/aerc/sigs/formal_eng.txt<Enter>
+<C-s>3 = :read ~/.config/aerc/sigs/liph.txt<Enter>
+<C-s>4 = :read ~/.config/aerc/sigs/phil.txt<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+# Inline comments are used as descriptions on the review screen
+y = :send<Enter> # Send
+n = :abort<Enter> # Abort (discard message, no confirmation)
+s = :sign<Enter> # Toggle signing
+x = :encrypt<Enter> # Toggle encryption to all recipients
+v = :preview<Enter> # Preview message
+p = :postpone<Enter> # Postpone
+q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone
+e = :edit<Enter> # Edit (body and headers)
+a = :attach<space> # Add attachment
+d = :detach<space> # Remove attachment
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

aerc/.config/aerc/notmuch-queries.conf

@@ -0,0 +1,12 @@
+Inbox=tag:inbox AND NOT tag:spam
+Unread=tag:unread AND NOT tag:spam
+Newsletters=tag:newsletter
+Shopping=tag:shopping
+Finance=tag:finance
+Travel=tag:travel
+Development=tag:dev
+Spam=tag:spam
+Sent=tag:sent
+Trash=tag:deleted OR folder:Trash
+Archive=tag:archive
+All Mail=*

aerc/.config/aerc/scripts/move-trash.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Get the current message's notmuch ID from aerc's environment
+# We'll use notmuch to find and move the file
+
+maildir="$HOME/.local/share/mail"
+
+# Find files for messages in current thread that aren't already in Trash
+notmuch search --output=files thread:{} 2>/dev/null | while read filepath; do
+    # Skip if already in Trash
+    if [[ "$filepath" == *"/Trash/"* ]]; then
+        continue
+    fi
+    
+    if [[ -f "$filepath" ]]; then
+        filename=$(basename "$filepath")
+        mkdir -p "$maildir/Trash/cur"
+        mv "$filepath" "$maildir/Trash/cur/$filename"
+    fi
+done
+
+# Re-index
+notmuch new >/dev/null 2>&1

aerc/.config/aerc/scripts/new-sync.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+MBSYNC=$(pgrep mbsync)
+NOTMUCH=$(pgrep notmuch)
+if [ -n "$MBSYNC" -o -n "$NOTMUCH" ]; then
+    echo "Already running one instance of mbsync or notmuch. Exiting..."
+    exit 0
+fi
+
+maildir="$HOME/.local/share/mail"
+
+echo "Moving messages tagged as *deleted* to Trash"
+notmuch search --format=text0 --output=files tag:deleted | while IFS= read -r -d '' filepath; do
+    # Skip if already in Trash
+    case "$filepath" in
+        */Trash/*)
+            continue
+            ;;
+    esac
+    
+    # Move to Trash if file exists
+    if [ -f "$filepath" ]; then
+        filename=$(basename "$filepath")
+        mkdir -p "$maildir/Trash/cur"
+        mv -v "$filepath" "$maildir/Trash/cur/$filename"
+    fi
+done
+
+mbsync -Va
+notmuch new
+PYTHONWARNINGS="ignore::UserWarning" afew --tag --new
+
+# Auto-tag and cleanup
+notmuch tag +sent -- folder:Sent and not tag:sent
+notmuch tag +trash -- folder:Trash and not tag:trash
+notmuch tag -deleted -- folder:Trash

aerc/.config/aerc/scripts/new-sync_1.sh

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+MBSYNC=$(pgrep mbsync)
+NOTMUCH=$(pgrep notmuch)
+
+if [ -n "$MBSYNC" -o -n "$NOTMUCH" ]; then
+    echo "Already running one instance of mbsync or notmuch. Exiting..."
+    exit 0
+fi
+
+echo "Deleting messages tagged as *deleted*"
+notmuch search --format=text0 --output=files tag:deleted | xargs -0 --no-run-if-empty rm -v
+
+mbsync -Va
+notmuch new

aerc/.config/aerc/scripts/sig-picker.sh

@@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+
+read input
+
+case "$input" in
+    "liiph@proton.me")
+        cat ~/.config/aerc/sigs/liph.txt
+        ;;
+    "liiph@protonmail.com")
+        cat ~/.config/aerc/sigs/liph.txt
+        ;;
+    "liiph@pm.me")
+        cat ~/.config/aerc/sigs/liph.txt
+        ;;
+    "ph.waibel@proton.me")
+        cat ~/.config/aerc/sigs/formal.txt
+        ;;
+    "ph.waibel@pm.me")
+        cat ~/.config/aerc/sigs/phil.txt
+        ;;
+    *)
+        # Default signature if no match
+        cat ~/.config/aerc/sigs/default.txt
+        ;;
+esac

aerc/.config/aerc/scripts/sync-mail.sh

@@ -0,0 +1,41 @@
+#!/bin/bash
+
+# Sync mail from ProtonMail Bridge (suppress CLOSE error)
+echo "Syncing mail from ProtonMail..."
+mbsync -a 2>&1 | grep -v "CLOSE"
+
+# Index new mail (this automatically runs post-new hook)
+echo "Indexing new messages..."
+notmuch new
+
+# Move all deleted messages to Trash folder
+echo "Cleaning up deleted messages..."
+DELETED_COUNT=0
+notmuch search --output=files tag:deleted 2>/dev/null | while read filepath; do
+    if [ -f "$filepath" ]; then
+        TRASH_DIR="$HOME/.local/share/mail/Trash/cur"
+        mkdir -p "$TRASH_DIR"
+        
+        FILENAME=$(basename "$filepath")
+        mv "$filepath" "$TRASH_DIR/$FILENAME"
+        ((DELETED_COUNT++))
+    fi
+done
+
+# Update notmuch after moving files
+if [ $DELETED_COUNT -gt 0 ]; then
+    echo "Moved $DELETED_COUNT message(s) to Trash"
+    notmuch new --no-hooks >/dev/null 2>&1
+fi
+
+# Sync moved messages back to ProtonMail
+echo "Syncing changes to ProtonMail..."
+mbsync -a 2>&1 | grep -v "CLOSE" >/dev/null
+
+# Notify if new mail
+NEW=$(notmuch count tag:unread)
+if [ $NEW -gt 0 ]; then
+    notify-send "📬 Mail" "$NEW unread message(s)"
+fi
+
+echo "Sync complete: $(date)"

aerc/.config/aerc/scripts/trash-message.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+
+# Save the piped message to temp file
+TEMP_MSG=$(mktemp)
+cat > "$TEMP_MSG"
+
+# Extract Message-ID more robustly
+MESSAGE_ID=$(grep -i "^Message-ID:" "$TEMP_MSG" | head -1 | sed 's/^[Mm]essage-[Ii][Dd]: *//; s/^<//; s/>$//' | tr -d '\r\n ')
+
+# Cleanup temp file
+rm "$TEMP_MSG"
+
+if [ -z "$MESSAGE_ID" ]; then
+    notify-send "Error" "Could not find Message-ID"
+    exit 1
+fi
+
+# Get file path from notmuch
+FILEPATH=$(notmuch search --output=files "id:$MESSAGE_ID" 2>/dev/null | head -1)
+
+if [ -z "$FILEPATH" ] || [ ! -f "$FILEPATH" ]; then
+    # Try alternative search
+    FILEPATH=$(notmuch search --output=files --exclude=false "*" 2>/dev/null | xargs grep -l "Message-ID.*$MESSAGE_ID" 2>/dev/null | head -1)
+fi
+
+if [ -z "$FILEPATH" ] || [ ! -f "$FILEPATH" ]; then
+    notify-send "Error" "File not found for Message-ID: $MESSAGE_ID"
+    exit 1
+fi
+
+# Move to Trash folder
+TRASH_DIR="$HOME/.local/share/mail/Trash/cur"
+mkdir -p "$TRASH_DIR"
+
+FILENAME=$(basename "$FILEPATH")
+mv "$FILEPATH" "$TRASH_DIR/$FILENAME"
+
+# Update notmuch database
+notmuch new --no-hooks >/dev/null 2>&1
+
+# Tag as deleted
+notmuch tag +deleted +trash -inbox -unread -- "id:$MESSAGE_ID" >/dev/null 2>&1
+
+# Trigger sync in background
+(sleep 2 && mbsync -a 2>&1 | grep -v CLOSE >/dev/null) &
+
+notify-send "📧 Aerc" "Moved to Trash"

aerc/.config/aerc/sigs/formal.txt

@@ -0,0 +1,3 @@
+-- 
+freundliche Grüsse
+Philipp Waibel

aerc/.config/aerc/sigs/formal_eng.txt

@@ -0,0 +1,3 @@
+-- 
+kind regards
+Philipp Waibel

aerc/.config/aerc/sigs/liph.txt

@@ -0,0 +1,3 @@
+-- 
+thanks
+Phil

aerc/.config/aerc/sigs/phil.txt

@@ -0,0 +1,3 @@
+-- 
+besten Dank im Voraus
+Philipp Waibel

aerc/.config/aerc/stylesets/catppuccin-mocha

@@ -0,0 +1,51 @@
+*.default=true
+*.normal=true
+
+default.fg=#cdd6f4
+
+error.fg=#f38ba8
+warning.fg=#fab387
+success.fg=#a6e3a1
+
+tab.fg=#6c7086
+tab.bg=#181825
+tab.selected.fg=#cdd6f4
+tab.selected.bg=#1e1e2e
+tab.selected.bold=true
+
+border.fg=#11111b
+border.bold=true
+
+msglist_unread.bold=true
+msglist_flagged.fg=#f9e2af
+msglist_flagged.bold=true
+msglist_result.fg=#89b4fa
+msglist_result.bold=true
+msglist_*.selected.bold=true
+msglist_*.selected.bg=#313244
+
+dirlist_*.selected.bold=true
+dirlist_*.selected.bg=#313244
+
+statusline_default.fg=#9399b2
+statusline_default.bg=#313244
+statusline_error.bold=true
+statusline_success.bold=true
+
+selector_focused.bg=#313244
+
+completion_default.selected.bg=#313244
+
+[viewer]
+url.fg=#89b4fa
+url.underline=true
+header.bold=true
+signature.dim=true
+diff_meta.bold=true
+diff_chunk.fg=#89b4fa
+diff_chunk_func.fg=#89b4fa
+diff_chunk_func.bold=true
+diff_add.fg=#a6e3a1
+diff_del.fg=#f38ba8
+quote_*.fg=#6c7086
+quote_1.fg=#9399b2

aerc/.config/aerc/templates/new-msg

@@ -0,0 +1,6 @@
+X-Mailer: aerc {{version}}
+
+{{if .From}}
+{{exec `~/.config/aerc/scripts/sig-picker.sh` (index .From 0).Address}}
+{{else}}
+{{end}}

aerc/.config/aerc/templates/reply-quoted

@@ -0,0 +1,7 @@
+X-Mailer: aerc {{version}}
+
+On {{dateFormat (.OriginalDate | toLocal) "Mon Jan 2, 2006 at 3:04 PM MST"}}, {{.OriginalFrom | names | join ", "}} wrote:
+{{trimSignature .OriginalText | quote}}
+
+
+{{exec `~/.config/aerc/scripts/sig-picker.sh` (index .From 0).Address}}

nvim/.config/nvim/lazy-lock.json

@@ -25,7 +25,6 @@
   "lazydev.nvim": { "branch": "main", "commit": "5231c62aa83c2f8dc8e7ba957aa77098cda1257d" },
   "lualine.nvim": { "branch": "master", "commit": "47f91c416daef12db467145e16bed5bbfe00add8" },
   "luvit-meta": { "branch": "main", "commit": "0ea4ff636c5bb559ffa78108561d0976f4de9682" },
-  "markview.nvim": { "branch": "main", "commit": "0a5033326f703d99a8788e2d47753d6298195e8a" },
   "mason-lspconfig.nvim": { "branch": "main", "commit": "8f1a3e6eecb638817e8999aaa16ada27cd54d867" },
   "mason-tool-installer.nvim": { "branch": "main", "commit": "517ef5994ef9d6b738322664d5fdd948f0fdeb46" },
   "mason.nvim": { "branch": "main", "commit": "57e5a8addb8c71fb063ee4acda466c7cf6ad2800" },
@@ -40,14 +39,17 @@
   "nvim-navic": { "branch": "master", "commit": "7d914a39a1ef8f4e22c2c4381abeef7c556f5a13" },
   "nvim-notify": { "branch": "master", "commit": "8701bece920b38ea289b457f902e2ad184131a5d" },
   "nvim-spectre": { "branch": "master", "commit": "72f56f7585903cd7bf92c665351aa585e150af0f" },
+  "nvim-surround": { "branch": "main", "commit": "1098d7b3c34adcfa7feb3289ee434529abd4afd1" },
   "nvim-tmux-navigation": { "branch": "main", "commit": "4898c98702954439233fdaf764c39636681e2861" },
   "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "5ca4aaa6efdcc59be46b95a3e876300cfead05ef" },
   "nvim-ts-context-commentstring": { "branch": "main", "commit": "1b212c2eee76d787bbea6aa5e92a2b534e7b4f8f" },
   "nvim-web-devicons": { "branch": "master", "commit": "6788013bb9cb784e606ada44206b0e755e4323d7" },
   "obsidian.nvim": { "branch": "main", "commit": "ae1f76a75c7ce36866e1d9342a8f6f5b9c2caf9b" },
   "plenary.nvim": { "branch": "master", "commit": "b9fd5226c2f76c951fc8ed5923d85e4de065e509" },
   "portal.nvim": { "branch": "main", "commit": "77d9d53fec945bfa407d5fd7120f1b4f117450ed" },
   "rainbow-delimiters.nvim": { "branch": "master", "commit": "8aafe2cbd89cd4090f573a98cab6b20366576fde" },
+  "render-markdown.nvim": { "branch": "main", "commit": "07d088bf8bdadd159eb807b90eaee86a4778383f" },
   "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" },
   "telescope.nvim": { "branch": "master", "commit": "e709d31454ee6e6157f0537f861f797bd44c0bad" },
   "trouble.nvim": { "branch": "main", "commit": "bd67efe408d4816e25e8491cc5ad4088e708a69a" },

nvim/.config/nvim/lua/plugins.inactive/markdown_1.lua

@@ -0,0 +1,123 @@
+return {
+  {
+    "OXY2DEV/markview.nvim",
+    lazy = false,
+    ft = "markdown",
+    dependencies = {
+      "nvim-treesitter/nvim-treesitter",
+      "nvim-tree/nvim-web-devicons",
+    },
+    config = function()
+      local presets = require("markview.presets")
+
+      require("markview").setup({
+        modes = { "n", "no", "c" },
+        hybrid_modes = { "n" },
+
+        callbacks = {
+          on_enable = function(_, win)
+            vim.wo[win].conceallevel = 2
+            vim.wo[win].concealcursor = ""
+          end,
+        },
+
+        markdown = {
+          headings = presets.headings.glow,
+
+          code_blocks = {
+            enable = true,
+            style = "language",
+            position = "overlay",
+            min_width = 60,
+            pad_amount = 2,
+            hl = "MarkviewCode",
+          },
+
+          block_quotes = {
+            enable = true,
+            default = {
+              border = "▋",
+              border_hl = "MarkviewBlockQuoteBorder",
+            },
+          },
+
+          tables = {
+            enable = true,
+            parts = {
+              top = { "╭", "─", "┬", "─", "╮" },
+              header = { "├", "─", "┼", "─", "┤" },
+              separator = { "├", "─", "┼", "─", "┤" },
+              row = { "│", " ", "│", " ", "│" },
+              bottom = { "╰", "─", "┴", "─", "╯" },
+            },
+            use_virt_lines = true,
+          },
+
+          list_items = {
+            enable = true,
+            indent_size = 2,
+            shift_width = 2,
+          },
+        },
+
+        markdown_inline = {
+          enable = true,
+
+          checkboxes = {
+            enable = true,
+            checked = {
+              text = "✓",
+              hl = "MarkviewCheckboxChecked",
+            },
+            unchecked = {
+              text = "☐",
+              hl = "MarkviewCheckboxUnchecked",
+            },
+            custom = {
+              {
+                match_string = "!",
+                text = "!",
+                hl = "MarkviewCheckboxImportant",
+              },
+              {
+                match_string = "-",
+                text = "◐",
+                hl = "MarkviewCheckboxPending",
+              },
+              {
+                match_string = "~",
+                text = "≈",
+                hl = "MarkviewCheckboxProgress",
+              },
+            },
+          },
+        },
+      })
+
+      -- Force override colors AFTER markview sets them up
+      vim.api.nvim_create_autocmd("FileType", {
+        pattern = "markdown",
+        callback = function()
+          vim.schedule(function()
+            vim.api.nvim_set_hl(0, "MarkviewCheckboxChecked", { fg = "#f9e2af", force = true })
+            vim.api.nvim_set_hl(0, "MarkviewCheckboxUnchecked", { fg = "#f9e2af", force = true })
+            vim.api.nvim_set_hl(0, "MarkviewCheckboxImportant", { fg = "#f9e2af", bold = true, force = true })
+            vim.api.nvim_set_hl(0, "MarkviewCheckboxPending", { fg = "#f9e2af", force = true })
+            vim.api.nvim_set_hl(0, "MarkviewCheckboxProgress", { fg = "#f9e2af", force = true })
+          end)
+        end,
+      })
+
+      -- Checkbox extras
+      require("markview.extras.checkboxes").setup({
+        default = "X",
+        remove_markers = false,
+        exit = true,
+      })
+
+      -- Keymaps
+      vim.keymap.set("n", "<leader>mt", "<cmd>Markview toggle<cr>", { desc = "Toggle Markview" })
+      vim.keymap.set("n", "<leader>ch", "<cmd>Checkboxes toggle<cr>", { desc = "Toggle checkbox" })
+    end,
+  },
+}

nvim/.config/nvim/lua/plugins/markdown.lua

@@ -1,225 +0,0 @@
-return {
-  {
-    "OXY2DEV/markview.nvim",
-    lazy = false,
-    ft = "markdown",
-    dependencies = {
-      "nvim-treesitter/nvim-treesitter",
-      "nvim-tree/nvim-web-devicons",
-    },
-    config = function()
-      local presets = require("markview.presets")
-
-      require("markview").setup({
-        modes = { "n", "no", "c" },
-        hybrid_modes = { "n" },
-
-        callbacks = {
-          on_enable = function(_, win)
-            vim.wo[win].conceallevel = 2
-            vim.wo[win].concealcursor = ""
-          end,
-        },
-
-        -- Glow headings preset
-        headings = presets.headings.glow,
-
-        -- Code blocks configuration
-        code_blocks = {
-          enable = true,
-          style = "language",
-          position = "overlay",
-          min_width = 60,
-          pad_amount = 2,
-          pad_char = " ",
-
-          language_names = {
-            { "py", "python" },
-            { "cpp", "C++" },
-            { "js", "javascript" },
-            { "ts", "typescript" },
-            { "sh", "bash" },
-          },
-
-          hl = "MarkviewCode",
-          sign = true,
-          sign_hl = "MarkviewCodeSign",
-        },
-
-        -- Block quotes configuration
-        block_quotes = {
-          enable = true,
-          default = {
-            border = "▋",
-            border_hl = "MarkviewBlockQuoteBorder",
-          },
-
-          callouts = {
-            {
-              match_string = "NOTE",
-              callout_preview = "󰋽 Note",
-              callout_preview_hl = "MarkviewBlockQuoteNote",
-              border = "▋",
-              border_hl = "MarkviewBlockQuoteNote",
-            },
-            {
-              match_string = "TIP",
-              callout_preview = "󰌶 Tip",
-              callout_preview_hl = "MarkviewBlockQuoteTip",
-              border = "▋",
-              border_hl = "MarkviewBlockQuoteTip",
-            },
-            {
-              match_string = "IMPORTANT",
-              callout_preview = " Important",
-              callout_preview_hl = "MarkviewBlockQuoteImportant",
-              border = "▋",
-              border_hl = "MarkviewBlockQuoteImportant",
-            },
-            {
-              match_string = "WARNING",
-              callout_preview = " Warning",
-              callout_preview_hl = "MarkviewBlockQuoteWarn",
-              border = "▋",
-              border_hl = "MarkviewBlockQuoteWarn",
-            },
-            {
-              match_string = "CAUTION",
-              callout_preview = " Caution",
-              callout_preview_hl = "MarkviewBlockQuoteError",
-              border = "▋",
-              border_hl = "MarkviewBlockQuoteError",
-            },
-          },
-        },
-
-        -- Checkboxes configuration
-        checkboxes = {
-          enable = true,
-          checked = {
-            text = "✓",
-            hl = "MarkviewCheckboxChecked",
-            scope_hl = nil,
-          },
-          unchecked = {
-            text = "☐",
-            hl = "MarkviewCheckboxUnchecked",
-            scope_hl = nil,
-          },
-          custom = {
-            {
-              match_string = "!",
-              text = "!",
-              hl = "MarkviewCheckboxImportant",
-              scope_hl = nil,
-            },
-            {
-              match_string = "-",
-              text = "◐",
-              hl = "MarkviewCheckboxPending",
-              scope_hl = nil,
-            },
-            {
-              match_string = "~",
-              text = "≈",
-              hl = "MarkviewCheckboxProgress",
-              scope_hl = nil,
-            },
-          },
-        },
-
-        -- Tables with rounded borders
-        tables = {
-          enable = true,
-
-          parts = {
-            top = { "╭", "─", "┬", "─", "╮" },
-            header = { "├", "─", "┼", "─", "┤" },
-            separator = { "├", "─", "┼", "─", "┤" },
-            row = { "│", " ", "│", " ", "│" },
-            bottom = { "╰", "─", "┴", "─", "╯" },
-
-            overlap = { "┼" },
-          },
-
-          hl = {
-            "MarkviewTableHeader",
-            "MarkviewTableBorder",
-            "MarkviewTableBorder",
-            "MarkviewTableBorder",
-            "MarkviewTableBorder",
-          },
-
-          use_virt_lines = true,
-        },
-
-        -- List items
-        list_items = {
-          enable = true,
-          indent_size = 2,
-          shift_width = 2,
-
-          marker_minus = {
-            add_padding = true,
-            text = "•",
-            hl = "MarkviewListItemMinus",
-          },
-          marker_plus = {
-            add_padding = true,
-            text = "•",
-            hl = "MarkviewListItemPlus",
-          },
-          marker_star = {
-            add_padding = true,
-            text = "•",
-            hl = "MarkviewListItemStar",
-          },
-        },
-      })
-
-      -- Catppuccin Mocha colors
-      vim.cmd([[
-        " Code blocks - Catppuccin Mocha
-        highlight MarkviewCode guibg=#181825
-        highlight MarkviewCodeSign guifg=#89b4fa
-
-        " Block quotes - Catppuccin Mocha
-        highlight MarkviewBlockQuoteBorder guifg=#6c7086
-        highlight MarkviewBlockQuoteNote guifg=#89b4fa
-        highlight MarkviewBlockQuoteTip guifg=#a6e3a1
-        highlight MarkviewBlockQuoteImportant guifg=#cba6f7
-        highlight MarkviewBlockQuoteWarn guifg=#fab387
-        highlight MarkviewBlockQuoteError guifg=#f38ba8
-
-        " Checkboxes - Catppuccin Mocha
-        highlight MarkviewCheckboxChecked guifg=#a6e3a1
-        highlight MarkviewCheckboxUnchecked guifg=#6c7086
-        highlight MarkviewCheckboxImportant guifg=#f38ba8 gui=bold
-        highlight MarkviewCheckboxPending guifg=#fab387
-        highlight MarkviewCheckboxProgress guifg=#89b4fa
-
-        " List items - Catppuccin Mocha
-        highlight MarkviewListItemMinus guifg=#89b4fa
-        highlight MarkviewListItemPlus guifg=#a6e3a1
-        highlight MarkviewListItemStar guifg=#cba6f7
-
-        " Tables - Catppuccin Mocha
-        highlight MarkviewTableHeader guifg=#cba6f7 gui=bold
-        highlight MarkviewTableBorder guifg=#6c7086
-      ]])
-
-      -- Setup checkbox toggle extras
-      require("markview.extras.checkboxes").setup({
-        default = "X",
-        remove_markers = false,
-        exit = true,
-        default_marker = "-",
-        default_state = "X",
-      })
-
-      -- Keymaps
-      vim.keymap.set("n", "<leader>mt", "<cmd>Markview toggle<cr>", { desc = "Toggle Markview" })
-      vim.keymap.set("n", "<leader>ch", "<cmd>Checkboxes toggle<cr>", { desc = "Toggle checkbox" })
-    end,
-  },
-}

nvim/.config/nvim/lua/plugins/nvim-surround.lua

@@ -0,0 +1,227 @@
+-- nvim-surround configuration with autopairs, treesitter, and comment integration
+-- Place this in ~/.config/nvim/lua/plugins/nvim-surround.lua (for lazy.nvim)
+
+return {
+  -- nvim-surround: manipulate surroundings
+  {
+    "kylechui/nvim-surround",
+    version = "*",
+    event = "VeryLazy",
+    dependencies = {
+      "nvim-treesitter/nvim-treesitter",
+      "nvim-treesitter/nvim-treesitter-textobjects",
+    },
+    config = function()
+      require("nvim-surround").setup({
+        keymaps = {
+          insert = "<C-g>s",
+          insert_line = "<C-g>S",
+          normal = "ys",
+          normal_cur = "yss",
+          normal_line = "yS",
+          normal_cur_line = "ySS",
+          visual = "S",
+          visual_line = "gS",
+          delete = "ds",
+          change = "cs",
+          change_line = "cS",
+        },
+
+        -- Custom surrounds
+        surrounds = {
+          -- Function call surround
+          ["f"] = {
+            add = function()
+              local result = require("nvim-surround.config").get_input("Enter function name: ")
+              if result then
+                return { { result .. "(" }, { ")" } }
+              end
+            end,
+            find = function()
+              return require("nvim-surround.config").get_selection({ motion = "a(" })
+            end,
+            delete = "^([^(]+%()().-(%))()$",
+            change = {
+              target = "^([^(]+%()().-(%))()$",
+              replacement = function()
+                local result = require("nvim-surround.config").get_input("Enter function name: ")
+                if result then
+                  return { { result .. "(" }, { ")" } }
+                end
+              end,
+            },
+          },
+
+          -- Markdown code block
+          ["c"] = {
+            add = function()
+              local lang = require("nvim-surround.config").get_input("Enter language: ")
+              return { { "```" .. (lang or "") }, { "```" } }
+            end,
+          },
+
+          -- HTML/JSX tag with class
+          ["C"] = {
+            add = function()
+              local class = require("nvim-surround.config").get_input("Enter class name: ")
+              if class then
+                return { { '<div class="' .. class .. '">' }, { "</div>" } }
+              end
+            end,
+          },
+
+          -- Template literal (JavaScript/TypeScript)
+          ["`"] = {
+            add = { "`", "`" },
+            find = "`.-`",
+            delete = "^(`)().-(`)()$",
+          },
+        },
+
+        -- Use treesitter for better text object detection
+        move_cursor = "begin",
+        indent_lines = function(start, stop)
+          local b = vim.bo
+          -- Only indent if the buffer is not a special filetype
+          if b.ft ~= "help" and b.ft ~= "man" and b.ft ~= "qf" then
+            vim.cmd(string.format("silent normal! %dG=%dG", start, stop))
+          end
+        end,
+      })
+    end,
+  },
+
+  -- nvim-autopairs: auto-close brackets with integration
+  {
+    "windwp/nvim-autopairs",
+    event = "InsertEnter",
+    dependencies = { "hrsh7th/nvim-cmp" },
+    config = function()
+      local npairs = require("nvim-autopairs")
+      local Rule = require("nvim-autopairs.rule")
+      local cond = require("nvim-autopairs.conds")
+
+      npairs.setup({
+        check_ts = true, -- Use treesitter
+        ts_config = {
+          lua = { "string", "source" },
+          javascript = { "string", "template_string" },
+          java = false,
+        },
+        disable_filetype = { "TelescopePrompt", "spectre_panel" },
+        fast_wrap = {
+          map = "<M-e>",
+          chars = { "{", "[", "(", '"', "'" },
+          pattern = string.gsub([[ [%'%"%)%>%]%)%}%,] ]], "%s+", ""),
+          offset = 0,
+          end_key = "$",
+          keys = "qwertyuiopzxcvbnmasdfghjkl",
+          check_comma = true,
+          highlight = "PmenuSel",
+          highlight_grey = "LineNr",
+        },
+        enable_moveright = true,
+        enable_afterquote = true,
+        enable_check_bracket_line = true,
+        enable_bracket_in_quote = true,
+        enable_abbr = false,
+        break_undo = true,
+        map_cr = true,
+        map_bs = true,
+        map_c_h = false,
+        map_c_w = false,
+      })
+
+      -- Add spacing inside pairs
+      local brackets = { { "(", ")" }, { "[", "]" }, { "{", "}" } }
+      npairs.add_rules({
+        Rule(" ", " "):with_pair(function(opts)
+          local pair = opts.line:sub(opts.col - 1, opts.col)
+          return vim.tbl_contains({
+            brackets[1][1] .. brackets[1][2],
+            brackets[2][1] .. brackets[2][2],
+            brackets[3][1] .. brackets[3][2],
+          }, pair)
+        end),
+      })
+
+      for _, bracket in pairs(brackets) do
+        npairs.add_rules({
+          Rule(bracket[1] .. " ", " " .. bracket[2])
+            :with_pair(function()
+              return false
+            end)
+            :with_move(function(opts)
+              return opts.prev_char:match(".%" .. bracket[2]) ~= nil
+            end)
+            :use_key(bracket[2]),
+        })
+      end
+
+      -- Add arrow function for JavaScript/TypeScript
+      npairs.add_rules({
+        Rule("%(.*%)%s*=>$", " {  }", { "typescript", "typescriptreact", "javascript", "javascriptreact" })
+          :use_regex(true)
+          :set_end_pair_length(2),
+      })
+
+      -- Integration with nvim-cmp
+      local cmp_autopairs = require("nvim-autopairs.completion.cmp")
+      local cmp = require("cmp")
+      cmp.event:on("confirm_done", cmp_autopairs.on_confirm_done())
+    end,
+  },
+
+  -- Comment.nvim: smart commenting with treesitter
+  {
+    "numToStr/Comment.nvim",
+    event = { "BufReadPre", "BufNewFile" },
+    dependencies = {
+      "nvim-treesitter/nvim-treesitter",
+      "JoosepAlviste/nvim-ts-context-commentstring", -- For better JSX/TSX comments
+    },
+    config = function()
+      require("Comment").setup({
+        -- Use treesitter for comment detection
+        pre_hook = require("ts_context_commentstring.integrations.comment_nvim").create_pre_hook(),
+
+        padding = true,
+        sticky = true,
+        ignore = "^$", -- Ignore empty lines
+
+        -- LHS of toggle mappings in NORMAL mode
+        toggler = {
+          line = "gcc", -- Line-comment toggle
+          block = "gbc", -- Block-comment toggle
+        },
+
+        -- LHS of operator-pending mappings in NORMAL and VISUAL mode
+        opleader = {
+          line = "gc", -- Line-comment keymap
+          block = "gb", -- Block-comment keymap
+        },
+
+        -- LHS of extra mappings
+        extra = {
+          above = "gcO", -- Add comment on the line above
+          below = "gco", -- Add comment on the line below
+          eol = "gcA", -- Add comment at the end of line
+        },
+
+        mappings = {
+          basic = true,
+          extra = true,
+        },
+      })
+    end,
+  },
+
+  -- nvim-ts-context-commentstring: JSX/TSX comment support
+  {
+    "JoosepAlviste/nvim-ts-context-commentstring",
+    lazy = true,
+    opts = {
+      enable_autocmd = false, -- Disable auto commands, Comment.nvim handles it
+    },
+  },
+}

nvim/.config/nvim/lua/plugins/render-markdown.lua

@@ -0,0 +1,172 @@
+return {
+  {
+    "MeanderingProgrammer/render-markdown.nvim",
+    dependencies = {
+      "nvim-treesitter/nvim-treesitter",
+      "nvim-tree/nvim-web-devicons",
+    },
+    ft = { "markdown" },
+    opts = {
+      -- File types to enable rendering
+      file_types = { "markdown" },
+
+      -- Code block configuration
+      code = {
+        -- Show language name and icon
+        enabled = true,
+        -- Position: 'left', 'right', 'language'
+        sign = true,
+        -- Style for code blocks
+        style = "full",
+        -- Position of language name (left or right)
+        position = "left",
+        -- Disable if you don't want the background
+        disable_background = false,
+        -- Width of code block
+        width = "full",
+        -- Language icon on the right
+        right_pad = 1,
+        left_pad = 1,
+        -- Border around code blocks
+        border = "thin",
+        -- Highlight for the language label
+        highlight = "RenderMarkdownCode",
+        highlight_inline = "RenderMarkdownCodeInline",
+      },
+
+      -- Heading configuration
+      heading = {
+        enabled = true,
+        sign = true,
+        icons = { "󰲡 ", "󰲣 ", "󰲥 ", "󰲧 ", "󰲩 ", "󰲫 " },
+        backgrounds = {
+          "RenderMarkdownH1Bg",
+          "RenderMarkdownH2Bg",
+          "RenderMarkdownH3Bg",
+          "RenderMarkdownH4Bg",
+          "RenderMarkdownH5Bg",
+          "RenderMarkdownH6Bg",
+        },
+        foregrounds = {
+          "RenderMarkdownH1",
+          "RenderMarkdownH2",
+          "RenderMarkdownH3",
+          "RenderMarkdownH4",
+          "RenderMarkdownH5",
+          "RenderMarkdownH6",
+        },
+      },
+
+      -- Checkbox configuration
+      checkbox = {
+        enabled = true,
+        render_modes = false,
+        bullet = false,
+        left_pad = 0,
+        right_pad = 1,
+        unchecked = {
+          icon = "󰄱 ",
+          highlight = "RenderMarkdownUnchecked",
+          scope_highlight = nil,
+        },
+        checked = {
+          icon = "󰱒 ",
+          highlight = "RenderMarkdownChecked",
+          scope_highlight = nil,
+        },
+        -- Custom checkbox states
+        custom = {
+          urgent = {
+            raw = "[!]",
+            rendered = "󰀦 ",
+            highlight = "RenderMarkdownUrgent",
+          },
+        },
+      },
+
+      -- Block Quotes
+      quote = {
+        enabled = true,
+        render_modes = false,
+        icon = "▋",
+        repeat_linebreak = false,
+        highlight = {
+          "RenderMarkdownQuote1",
+          "RenderMarkdownQuote2",
+          "RenderMarkdownQuote3",
+          "RenderMarkdownQuote4",
+          "RenderMarkdownQuote5",
+          "RenderMarkdownQuote6",
+        },
+      },
+      -- Table configuration
+      pipe_table = {
+        enabled = true,
+        style = "full",
+        cell = "padded",
+        border = {
+          "┌",
+          "┬",
+          "┐",
+          "├",
+          "┼",
+          "┤",
+          "└",
+          "┴",
+          "┘",
+          "│",
+          "─",
+        },
+      },
+      config = function(_, opts)
+        require("render-markdown").setup(opts)
+
+        -- Function to apply colors
+        local function apply_colors()
+          local colors = {
+            -- Heading colors (gradient from red to blue)
+            h1 = { fg = "#ff6b6b", bg = "#3d1f1f" },
+            h2 = { fg = "#ffa07a", bg = "#3d2a1f" },
+            h3 = { fg = "#ffd700", bg = "#3d3d1f" },
+            h4 = { fg = "#98fb98", bg = "#1f3d1f" },
+            h5 = { fg = "#87ceeb", bg = "#1f2a3d" },
+            h6 = { fg = "#dda0dd", bg = "#2a1f3d" },
+
+            -- Code block colors
+            code = { bg = "#1e1e2e" },
+
+            -- Checkbox colors
+            checked = { fg = "#a6e3a1" },
+            unchecked = { fg = "#6c7086" },
+            urgent = { fg = "#f38ba8" },
+          }
+
+          -- Apply heading colors
+          for i = 1, 6 do
+            local h = "h" .. i
+            vim.api.nvim_set_hl(0, "RenderMarkdownH" .. i, { fg = colors[h].fg, bold = true })
+            vim.api.nvim_set_hl(0, "RenderMarkdownH" .. i .. "Bg", { bg = colors[h].bg })
+          end
+
+          -- Apply code block colors
+          vim.api.nvim_set_hl(0, "RenderMarkdownCode", { bg = colors.code.bg })
+          vim.api.nvim_set_hl(0, "RenderMarkdownCodeInline", { bg = colors.code.bg })
+
+          -- Apply checkbox colors with force
+          vim.api.nvim_set_hl(0, "RenderMarkdownChecked", { fg = colors.checked.fg, default = false })
+          vim.api.nvim_set_hl(0, "RenderMarkdownUnchecked", { fg = colors.unchecked.fg, default = false })
+          vim.api.nvim_set_hl(0, "RenderMarkdownUrgent", { fg = colors.urgent.fg, bold = true, default = false })
+        end
+
+        -- Apply colors immediately
+        apply_colors()
+
+        -- Re-apply colors after colorscheme changes
+        vim.api.nvim_create_autocmd("ColorScheme", {
+          pattern = "*",
+          callback = apply_colors,
+        })
+      end,
+    },
+  },
+}

nvim/.config/nvim/lua/plugins/treesitter.lua

@@ -6,14 +6,33 @@ return {
       local config = require("nvim-treesitter.configs")
       config.setup({
         ensure_installed = {
-          "bash", -- For bash code blocks
-          "html", -- For HTML code blocks
-          "sql", -- For SQL code blocks
-          "dockerfile", -- For Docker code blocks
+          "markdown",
+          "markdown_inline",
+          -- Your code block languages
+          "python",
+          "java",
+          "sql",
+          "bash",
+          "html",
+          -- Other languages you use
+          "lua",
+          "vim",
         },
+
+        -- Auto install missing parsers
         auto_install = true,
-        highlight = { enable = true },
-        indent = { enable = true },
+
+        -- Enable syntax highlighting
+        highlight = {
+          enable = true,
+          -- Optional: disable markdown highlighting if render-markdown handles it
+          -- disable = { 'markdown' },
+        },
+
+        -- Enable indentation
+        indent = {
+          enable = true,
+        },
       })
     end,
   },

yazi/.config/yazi/bookmark

@@ -14,5 +14,4 @@ hdd1	/mnt/hdd1/	1
 flash1	/mnt/flash1/	8
 Downloads	/home/liph/Downloads/	D
 dotfiles	/home/liph/dotfiles/	d
-Desktop	/home/liph/Desktop/	d
 .config	/home/liph/.config/	c

zshrc/.aliases.zsh

@@ -2,6 +2,7 @@ alias cl='clear'
 alias cld='clear && cd'
 alias neo='neofetch'
 alias f='fuck'
+alias a='aerc'
 
 # put everything on nvim
 alias nano='nvim'
@@ -101,7 +102,7 @@ alias tr='trash-restore'
 
 # pyenv
 alias pyl='pyenv local'           # set this for folder in spec python version
-alias pyg='pyenv global'          # changes the global python version   
+alias pyg='pyenv global'          # changes the global python version
 alias pyve='pyenv virtualenvs'    # shows all possible vitualenvironments
 alias pyd='pyenv virtualenv-delete'
 alias pyn='pyenv virtualenv'      # makes a new env $VSERION $NAME
@@ -111,7 +112,7 @@ alias pyi='pyenv install'
 
 # aria2 and yt-dlp
 alias aryt="yt-dlp --external-downloader aria2c --external-downloader-args '-x 8 -j2'"                  # add URL in ''
-alias aria='aria2c -x 8'  # add URL in '' for 8 segmented download 
+alias aria='aria2c -x 8'  # add URL in '' for 8 segmented download
 alias yd='yt-dlp'         # copy link from videodownload helper and add the URL in ''
 
 # ffmpeg
@@ -134,7 +135,7 @@ alias boumo='borg umount /tmp/borg'                   # unmount the mount folder
 alias sysen='sudo systemctl enable'
 alias sysst='sudo systemctl start'
 
-# podmand 
+# podmand
 alias pops='podman ps'
 alias pos='podman start'
 alias post='podman stop'