updated everything

aerc/.config/aerc/AGENTS.md

@@ -1,25 +1,28 @@
 # Agent Guidelines: Aerc Configuration Repository
 
-This repository contains the configuration and customization for `aerc`, a terminal-based email client. It is optimized for a workflow involving `notmuch` for indexing, `mbsync` for synchronization, `abook` for address management, `khal` for calendar, and `taskwarrior` for tasks.
+This repository contains the configuration and customization for `aerc`, a terminal-based email client. It is optimized for a workflow involving `notmuch` for indexing, `mbsync` for synchronization, and `abook` for address management (with a fuzzy recipient picker inside Neovim).
 
 ## 1. Build, Lint, and Test Commands
 
 ### Sync and Maintenance
-- **Global Sync**: Run `mailsync` (bound to `u` in `aerc`) to perform:
+- **Global Sync**: Run `mailsync` (`~/.local/bin/mailsync`, bound to `u` in `aerc`) to perform:
-  1. `mbsync -a` (Mail sync)
+  1. `mbsync -c ~/.config/isync/mksyncrc <channel>` for channels `liphlink-phil`, `liphlink-spam`, `proton` (per-channel failure tolerated; Proton Bridge check before the proton channel)
-  2. `vdirsyncer sync` (Calendar sync)
+  2. `NOTMUCH_CONFIG=~/.config/notmuch/<acct>/config notmuch new` for `phil`, `proton`, `spam` (per-account databases)
-  3. `caldawarrior sync` (Task sync)
+  3. abook contact rebuild: every unique sender from the `phil` and `proton` accounts (spam account excluded, junk/trash/deleted filtered, own addresses and MAILER-DAEMON dropped), merged with existing manual abook entries, written atomically to `~/.local/share/abook/addressbook`
-  4. `notmuch new` for all account databases (Indexing)
+- **Scheduling**: systemd user timers run `mailsync` every day at 08:00, 12:00, 17:00 (`mailsync.timer`, `Persistent=true`) plus 2 minutes after login (`mailsync-login.timer`). A `flock` lock prevents concurrent runs.
-  5. `notmuch-abook-sync` (Address book population)
+- **Logs**: per-run logs rotated in `~/.local/share/aerc/logs/` (last 7 kept: `mailsync.log` is newest, `.1`–`.7` older runs).
+- **Safety**: the abook datafile is backed up to `addressbook.pre-mailsync` before the first rebuild; the generated file is validated with `abook --convert` before replacing the datafile.
 
 ### Linting
 - **Permissions**: `accounts.conf` must be `0600`.
-- **Dependencies**: `w3m`, `bat`, `yazi`, `notmuch`, `abook`, `pass`, `isync`, `khal`, `vdirsyncer`, `task`, `taskwarrior-tui`, `caldawarrior`.
+- **Dependencies**: `w3m`, `bat`, `less` (pager scrolling), `yazi`, `notmuch`, `abook`, `pass`, `isync` (mbsync), `fzf`, `flock`, `chafa` (inline images), `urlscan` (links), `pandoc` (HTML send), `mpv` (video parts), `zathura` (PDF).
 
 ### Testing
 - **Filters**: `cat email.html | w3m -T text/html -dump`
-- **Calendar**: `khal list`
+- **Contacts**: `abook --mutt-query "<term>"` (must output tab-delimited `email\tname`)
-- **Tasks**: `task list`
+- **Sync**: run `mailsync` and inspect `~/.local/share/aerc/logs/mailsync.log`
+- **HTML send**: review screen `y` uses `~/.local/bin/aerc-md-convert` (pandoc) — must produce HTML on stdout
+- **Links**: `,l` = fuzzy fzf link picker (`:menu -lc fzf :open-link`), `,lu` = urlscan; OSC8 links are auto-detected from the host terminal (`[general].inherit-host-tty-features`, default on — do NOT set `enable-osc8`, deprecated in aerc 0.22)
 
 ## 2. Code Style Guidelines
 
@@ -32,12 +35,24 @@ This repository contains the configuration and customization for `aerc`, a termi
 - **Leader**: `,` (comma).
 - **Tab switching**: `Alt+n` (next) and `Alt+p` (prev).
 - **Contacts**: `,ab` opens `abook`.
-- **Calendar**: `,ca` opens unified `khal`.
+- **Compose with picker**: `M` (works in every context) = `:menu -t Compose -c 'mail-compose' :compose` — `mail-compose` runs in a popover (TTY) with labelled, skippable fzf passes: [1/5] account (switches tab via IPC `:change-tab`), [2/5] from/alias (parsed from `accounts.conf`), [3/5] To, [4/5] Cc, [5/5] Bcc. Marking uses **Tab or Ctrl+Space** (Ctrl+A = mark all). Its output is ONE line (`-H "From: ..." -H "To: ..." …`) — `:menu` executes each stdout line as a separate command, so all headers must share one line. Nothing picked → empty composer. Plain empty compose stays on `C`/`m`. `M` is explicitly cleared in `[terminal]` so it passes through to embedded terminal apps.
-- **Tasks**: `,ta` opens `taskwarrior-tui`.
+- **Attachments (compose)**: while typing in the editor (`edit-headers=true` sends keys to nvim), use **`,a` in normal mode** or **`<Alt+a>` in insert mode** — `after/ftplugin/mail.lua` opens yazi in a terminal split and attaches every selected file to the draft via IPC (`aerc :attach <path>`, one call per file — `:attach` rejects multiple paths per call). aerc-side fallbacks: **`<F4>`** (editor context) and **`,a`** (`:menu -t Attach -c 'yazi --chooser-file=%f ~/Downloads' :attach`, compose-fields + review contexts). `<C-k>`/`<C-a>` = `:attach<space>` for raw path input; `d` on review detaches. (`file-picker-cmd` is deliberately unset: aerc runs it without a TTY, so TUI pickers must use `:menu`.)
+- **Compose header order**: `[compose].header-layout=To,From,Cc,Bcc,Subject` so Cc/Bcc appear above Subject in the editor.
+- **Attachments (viewer)**: `n`/`p` navigate parts; `s` saves the current part to `~/Downloads`; `S = :save<space>` prompts (relative to `[general].default-save-path=~/Downloads`); `,sa` saves all attachments.
 
-### Terminal Tabs (Khal/Taskwarrior)
+### Helper scripts (`~/.local/bin`)
-- **Escape**: Press `Ctrl+x` to release terminal focus and use `aerc` commands.
+- **`mailsync`** — see the Sync and Maintenance section.
-- **Tab Passthrough**: `Tab` and `Backtab` are passed to terminal apps for internal navigation.
+- **`mail-compose`** — `:menu` picker driving `:compose` natively (bound to `M`); dispatches `:change-tab` over IPC for account selection; prints `-H` + quoted header lines.
+- **`aerc-md-convert`** — pandoc markdown→HTML converter used by `:multipart text/html` (review `y`).
+- **Backup layout**: all live above via symlinks into this repo — scripts in `~/dotfiles/scripts/scripts/`, systemd units in `~/dotfiles/systemd/.config/systemd/user/`, aerc config in `aerc/.config/aerc/` (`~/.config/aerc` is a symlink). Commit + push to back up.
+
+### Neovim compose behavior (`after/ftplugin/mail.lua`)
+- **Fresh messages**: cursor auto-lands on the `Subject:` line (insert mode at end); replies are left as-is (quote detection: `On ... wrote:` / `>` prefix / `In-Reply-To`).
+
+### Markdown sending
+- Drafts are written in **markdown** (`ft=mail.markdown`, spell-checked).
+- Review screen `y` = `:multipart text/html` → `aerc-md-convert` (pandoc + minimal inline CSS) → sends **multipart/alternative** (plain markdown + rendered HTML). Recipients in GUI clients see rendered HTML.
+- PDF is not an email body format; attach PDFs with `,a` if needed.
 
 ### Neovim integration (`after/ftplugin/mail.lua`)
 - **Completion**: Triggered by `Tab` on header lines using `abook --mutt-query`.

aerc/.config/aerc/accounts.conf

@@ -1,5 +1,5 @@
 [phil]
-source = notmuch:///home/liph/Mail/phil
+source = notmuch://phil
 query-map = ~/.config/aerc/phil.queries
 outgoing = smtp://phil%40liphlink.xyz@mail.liphlink.xyz:587
 outgoing-cred-cmd = pass show mail/phil@liphlink.xyz
@@ -10,7 +10,7 @@ postpone = Drafts
 aliases = pw@liphlink.xyz,p.waibel@liphlink.xyz,philipp.waibel@liphlink.xyz
 
 [spam]
-source = notmuch:///home/liph/Mail/spam
+source = notmuch://spam
 query-map = ~/.config/aerc/notmuch-queries.conf
 outgoing = smtp://spam%40liphlink.xyz@mail.liphlink.xyz:587
 outgoing-cred-cmd = pass show mail/spam@liphlink.xyz
@@ -20,7 +20,7 @@ default = Inbox
 aliases = blue@liphlink.xyz,red@liphlink.xyz
 
 [proton]
-source = notmuch:///home/liph/Mail/proton
+source = notmuch://proton
 query-map = ~/.config/aerc/notmuch-queries.conf
 outgoing = smtp+insecure://liiph%40protonmail.com@127.0.0.1:1025
 outgoing-cred-cmd = pass show mail/liiph@protonmail.com

aerc/.config/aerc/aerc.conf

@@ -5,7 +5,7 @@
 # Used as a default path for save operations if no other path is specified.
 # ~ is expanded to the current user home dir.
 #
-#default-save-path=
+default-save-path=~/Downloads
 
 # If set to "gpg", aerc will use system gpg binary and keystore for all crypto
 # operations. If set to "internal", the internal openpgp keyring will be used.
@@ -22,7 +22,6 @@
 #
 # Default: false
 unsafe-accounts-conf=false
-index-format=notmuch://~/.local/share/mail
 # Output log messages to specified file. A path starting with ~/ is expanded to
 # the user home dir. When redirecting aerc's output to a file using > shell
 # redirection, this setting is ignored and log messages are printed to stdout.
@@ -58,8 +57,6 @@ log-level=warn
 # Display OSC8 strings in the embedded terminal
 #
 # Default: false
-#enable-osc8=false
-
 # Default shell command to use for :menu. This will be executed with sh -c and
 # will run in an popover dialog.
 #
@@ -282,6 +279,9 @@ dirlist-collapse=1
 #
 sort = -r date
 
+# Keep 2 lines of context visible when moving through the message list
+msglist-scroll-offset=2
+
 # Moves to next message when the current message is deleted
 #
 # Default: true
@@ -576,7 +576,7 @@ pager= bat --style=plain --paging=always
 # html-unsafe-images=false
 # html-filter=dante
 image/*=chafa -f kitty -s ${width}x${height}
-text/html=w3m -T text/html -dump -o display_link_number=1
+text/html=/usr/lib/aerc/filters/html
 application/pdf=zathura
 video/*=mpv
 header-layout=From,To,Subject,Date
@@ -640,6 +640,9 @@ editor=nvim +'set ft=mail.markdown'
 # Address book command
 address-book-cmd=abook --mutt-query '%s'
 
+# Order of headers in the compose editor (edit-headers=true: one per line, no | merging)
+header-layout=To,From,Cc,Bcc,Subject
+
 # Auto-complete addresses
 # address-book-cmd-match='%s'
 # address-book-cmd=abook --mutt-query '%s'
@@ -700,6 +703,8 @@ edit-headers=true
 # standard output, one file per line. If it is present, then aerc does not
 # capture the standard output and instead reads the files from the temporary
 # file which should have the same format.
+# file-picker-cmd: aerc runs it without a TTY, so TUI pickers (yazi) cannot run here.
+# Attachments use :menu with yazi instead (see binds.conf [compose] `a`).
 #file-picker-cmd=/home/liph/.local/bin/yazi-picker %f
 
 #
@@ -740,8 +745,6 @@ text/html=/home/liph/.local/bin/aerc-md-convert
 [filters]
 #
 text/plain=sed 's/^$//'
-
-# Filters allow you to pipe an email body through a shell command to render
 # certain emails differently, e.g. highlighting them with ANSI escape codes.
 #
 # The commands are invoked with sh -c. The following folders are prepended to
@@ -773,11 +776,10 @@ text/plain=sed 's/^$//'
 # against (non-case-sensitive) and a comma, e.g. subject,text will match a
 # subject which contains "text". Use header,~regex to match against a regex.
 #
-text/plain=colorize
 text/calendar=calendar
 message/delivery-status=colorize
 message/rfc822=colorize
-text/html=w3m -T text/html -dump -o display_link_number=1
+text/html=/usr/lib/aerc/filters/html
 #text/*=bat -fP --file-name="$AERC_FILENAME"
 #application/x-sh=bat -fP -l sh
 #image/*=catimg -w $(tput cols) -
@@ -814,7 +816,6 @@ text/html=w3m -T text/html -dump -o display_link_number=1
 text/html=w3m
 x-scheme-handler/http=librewolf
 x-scheme-handler/https=librewolf
-text/calendar=khal import --batch
 
 [hooks]
 #

aerc/.config/aerc/aerc.conf.pre-attach

@@ -0,0 +1,886 @@
+#
+# aerc main configuration
+
+[general]
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+unsafe-accounts-conf=false
+index-format=notmuch://~/.local/share/mail
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+log-file=~/.local/share/aerc/aerc.log
+log-level=warn
+
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+index-columns=flags:4,name<35%,subject,date>=
+column-name={{if match .Folder "(?i)Sent|Gesendet"}}{{index (.To | persons) 0}}{{else}}{{index (.From | persons) 0}}{{end}}
+border-char-vertical="│"
+border-char-horizontal="─"
+styleset-name="rose-pine-moon"
+threading-enabled=true
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+sidebar-width=34
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+dirlist-left={{if match .Folder "/"}}{{.Style (index (.Folder | split "/" | tail 1) 0) "folder_sub"}}{{else}}{{.Folder}}{{end}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+dirlist-right={{if .Unread}}{{humanReadable .Unread}} / {{end}}{{humanReadable .Exists}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+dirlist-tree=true
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+dirlist-collapse=1
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+sort = -r date
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+# pager=less -Rc
+pager= bat --style=plain --paging=always
+# html-unsafe-images=false
+# html-filter=dante
+image/*=chafa -f kitty -s ${width}x${height}
+text/html=w3m -T text/html -dump -o display_link_number=1
+application/pdf=zathura
+video/*=mpv
+header-layout=From,To,Subject,Date
+
+
+#w3m -dump -T text/html -o display_link_number=1
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+editor=nvim +'set ft=mail.markdown'
+
+# editor=nvim +setf\ mail
+# editor=nvim  # or your preferred editor
+# Address book command
+address-book-cmd=abook --mutt-query '%s'
+
+# Auto-complete addresses
+# address-book-cmd-match='%s'
+# address-book-cmd=abook --mutt-query '%s'
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+edit-headers=true
+
+#
+# Sets focus to the email body when the composer window opens.
+#
+# Default: false
+#focus-body=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurrence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=/home/liph/.local/bin/yazi-picker %f
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+format-flowed=false
+
+[multipart-converters]
+text/html=/home/liph/.local/bin/aerc-md-convert
+
+[filters]
+#
+text/plain=sed 's/^$//'
+
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+text/html=w3m -T text/html -dump -o display_link_number=1
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+text/html=w3m
+x-scheme-handler/http=librewolf
+x-scheme-handler/https=librewolf
+text/calendar=khal import --batch
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+
+###
+new-message=new-msg
+quoted-reply=reply-quoted
+
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+template-dirs=${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body
+
+[terminal]
+passthrough=false

aerc/.config/aerc/aerc.conf.pre-viewer

@@ -0,0 +1,891 @@
+#
+# aerc main configuration
+
+[general]
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+default-save-path=~/Downloads
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+unsafe-accounts-conf=false
+index-format=notmuch://~/.local/share/mail
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+log-file=~/.local/share/aerc/aerc.log
+log-level=warn
+
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+index-columns=flags:4,name<35%,subject,date>=
+column-name={{if match .Folder "(?i)Sent|Gesendet"}}{{index (.To | persons) 0}}{{else}}{{index (.From | persons) 0}}{{end}}
+border-char-vertical="│"
+border-char-horizontal="─"
+styleset-name="rose-pine-moon"
+threading-enabled=true
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+sidebar-width=34
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+dirlist-left={{if match .Folder "/"}}{{.Style (index (.Folder | split "/" | tail 1) 0) "folder_sub"}}{{else}}{{.Folder}}{{end}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+dirlist-right={{if .Unread}}{{humanReadable .Unread}} / {{end}}{{humanReadable .Exists}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+dirlist-tree=true
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+dirlist-collapse=1
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+sort = -r date
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+# pager=less -Rc
+pager= bat --style=plain --paging=always
+# html-unsafe-images=false
+# html-filter=dante
+image/*=chafa -f kitty -s ${width}x${height}
+text/html=w3m -T text/html -dump -o display_link_number=1
+application/pdf=zathura
+video/*=mpv
+header-layout=From,To,Subject,Date
+
+
+#w3m -dump -T text/html -o display_link_number=1
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+editor=nvim +'set ft=mail.markdown'
+
+# editor=nvim +setf\ mail
+# editor=nvim  # or your preferred editor
+# Address book command
+address-book-cmd=abook --mutt-query '%s'
+
+# Order of headers in the compose editor (edit-headers=true: one per line, no | merging)
+header-layout=To,From,Cc,Bcc,Subject
+
+# Auto-complete addresses
+# address-book-cmd-match='%s'
+# address-book-cmd=abook --mutt-query '%s'
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+edit-headers=true
+
+#
+# Sets focus to the email body when the composer window opens.
+#
+# Default: false
+#focus-body=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurrence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+# file-picker-cmd: aerc runs it without a TTY, so TUI pickers (yazi) cannot run here.
+# Attachments use :menu with yazi instead (see binds.conf [compose] `a`).
+#file-picker-cmd=/home/liph/.local/bin/yazi-picker %f
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+format-flowed=false
+
+[multipart-converters]
+text/html=/home/liph/.local/bin/aerc-md-convert
+
+[filters]
+#
+text/plain=sed 's/^$//'
+
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+text/html=w3m -T text/html -dump -o display_link_number=1
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+text/html=w3m
+x-scheme-handler/http=librewolf
+x-scheme-handler/https=librewolf
+text/calendar=khal import --batch
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+
+###
+new-message=new-msg
+quoted-reply=reply-quoted
+
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+template-dirs=${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body
+
+[terminal]
+passthrough=false

aerc/.config/aerc/binds.conf

@@ -14,6 +14,7 @@
 <A-n> = :next-tab<Enter>
 <C-t> = :terminal<Enter>
 ? = :help keys<Enter>
+M = :menu -t Compose -c 'mail-compose' :compose<Enter>
 <C-c> = :prompt 'Quit?' quit<Enter>
 <C-q> = :prompt 'Quit?' quit<Enter>
 <C-z> = :suspend<Enter>
@@ -98,7 +99,8 @@ rq = :reply -aq<Enter>
 Rr = :reply<Enter>
 Rq = :reply -q<Enter>
 H = :toggle-headers<Enter>
-,l = :pipe urlscan<Enter>
+,l = :menu -lc fzf :open-link<Enter>
+,lu = :pipe urlscan<Enter>
 
 # Attachment Handling
 n = :next-part<Enter>
@@ -124,18 +126,19 @@ $complete = <C-o>
 <C-k> = :attach<space>
 <C-a> = :attach<space>
 <F4> = :attach<space>
+,a = :menu -t Attach -c 'yazi --chooser-file=%f ~/Downloads' :attach<Enter>
 <A-p> = :prev-tab<Enter>
 <A-n> = :next-tab<Enter>
 <tab> = :next-field<Enter>
 <backtab> = :prev-field<Enter>
 
 [compose::editor]
-# While focused in the text editor (nvim)
+# While focused in the text editor (nvim) — only these keys reach aerc, the rest go to nvim
 $noinherit = true
 $ex = <C-x>
 <C-k> = :attach<space>
 <C-a> = :attach<space>
-<F4> = :attach<space>
+<F4> = :menu -t Attach -c 'yazi --chooser-file=%f ~/Downloads' :attach<Enter>
 
 [compose::review]
 # After exiting the editor
@@ -145,7 +148,7 @@ v = :preview<Enter>
 p = :postpone<Enter>
 q = :choose -o d discard abort -o p postpone postpone<Enter>
 e = :edit<Enter>
-a = :attach<space>
+,a = :menu -t Attach -c 'yazi --chooser-file=%f ~/Downloads' :attach<Enter>
 <C-k> = :attach<space>
 <C-a> = :attach<space>
 d = :detach<space>
@@ -155,6 +158,7 @@ d = :detach<space>
 $ex = <C-x>
 <C-p> = 
 <C-n> = 
+M = 
 <tab> = 
 <backtab> = 
 <A-p> = :prev-tab<Enter>

aerc/.config/aerc/binds.conf.pre-M

@@ -0,0 +1,161 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+
+# GLOBAL Navigation & Contacts
+( = :term abook<Enter>
+,ab = :term abook<Enter>
+,ca = :term khal interactive<Enter>
+,c1 = :term khal interactive -a personal<Enter>
+,c2 = :term khal interactive -a healplaylove<Enter>
+,c3 = :term khal interactive -a glarisegg<Enter>
+,ta = :term taskwarrior-tui<Enter>
+
+<A-p> = :prev-tab<Enter>
+<A-n> = :next-tab<Enter>
+<C-t> = :terminal<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+# Sync
+u = :term /home/liph/.local/bin/mailsync<Enter>
+
+# Navigation
+j = :next<Enter>
+k = :prev<Enter>
+<Down> = :next<Enter>
+<Up> = :prev<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+J = :next-folder<Enter>
+K = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<Left> = :collapse-folder<Enter>
+<Right> = :expand-folder<Enter>
+
+# Marking/Flagging
+v = :mark -v<Enter>
+V = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+<Esc> = :unmark -a<Enter>
+
+# Accounts
+,1 = :change-tab phil<Enter>
+,2 = :change-tab spam<Enter>
+,3 = :change-tab proton<Enter>
+
+# Folders
+,i = :cf Inbox<Enter>
+,u = :cf Unread<Enter>
+,n = :cf Newsletters<Enter>
+,f = :cf Finance<Enter>
+,s = :cf Shopping<Enter>
+,v = :cf Travel<Enter>
+,d = :cf Development<Enter>
+,x = :cf Spam<Enter>
+,tr = :cf Trash<Enter>
+,aa = :cf All Mail<Enter>
+
+# Actions
+<Enter> = :view<Enter>
+s = :split<Enter>
+S = :vsplit<Enter>
+d = :modify-labels +deleted -inbox<Enter>
+a = :archive flat<Enter>
+C = :compose<Enter>
+m = :compose<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+
+# Threads
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+# Navigation & UI
+q = :close<Enter>
+x = :close<Enter>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+H = :toggle-headers<Enter>
+,l = :pipe urlscan<Enter>
+
+# Attachment Handling
+n = :next-part<Enter>
+p = :prev-part<Enter>
+J = :next<Enter>
+K = :prev<Enter>
+o = :open<Enter>
+O = :open<Enter>
+s = :save ~/Downloads/<Enter>
+S = :save<space>
+,sa = :save -a ~/Downloads/<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# General compose view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :attach<space>
+<C-a> = :attach<space>
+<F4> = :attach<space>
+<A-p> = :prev-tab<Enter>
+<A-n> = :next-tab<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+
+[compose::editor]
+# While focused in the text editor (nvim)
+$noinherit = true
+$ex = <C-x>
+<C-k> = :attach<space>
+<C-a> = :attach<space>
+<F4> = :attach<space>
+
+[compose::review]
+# After exiting the editor
+y = :multipart text/html<Enter>:send<Enter>
+n = :abort<Enter>
+v = :preview<Enter>
+p = :postpone<Enter>
+q = :choose -o d discard abort -o p postpone postpone<Enter>
+e = :edit<Enter>
+a = :attach<space>
+<C-k> = :attach<space>
+<C-a> = :attach<space>
+d = :detach<space>
+
+[terminal]
+# Clear keys to allow passthrough to Khal/Taskwarrior
+$ex = <C-x>
+<C-p> = 
+<C-n> = 
+<tab> = 
+<backtab> = 
+<A-p> = :prev-tab<Enter>
+<A-n> = :next-tab<Enter>

herdr/.config/herdr/plugins/config/herdr-spreader/home.yml

@@ -11,14 +11,14 @@ workspaces:
             focus: true
       - label: Music
         panes:
-          - focus: true
+          - focus: false
           - split: right
             ratio: 0.5
             command: mc
       - label: Aerc
         panes:
           - command: aerc
-            focus: true
+            focus: false
 
   - name: Dotfiles
     root: /home/liph/dotfiles
@@ -28,3 +28,13 @@ workspaces:
         panes:
           - command: yazi
             focus: true
+
+  - name: Coding
+    root: /home/liph/code
+    focus: false
+    tabs:
+      - label: Pi
+        panes:
+          - focus: false
+          - split: right
+            ratio: 0.5

herdr/.config/herdr/release-notes.json

@@ -1,5 +1,5 @@
 {
-  "version": "0.9.0",
+  "version": "0.9.1",
-  "body": "### Added\n- Manage Local and saved SSH machines from one Herdr window, with a combined agent list, machine-scoped navigation, notifications, and automatic reconnects. Add and manage connections with `herdr machine`; a disconnected machine does not interrupt the others. (#3670)\n- Multiple clients can now view different workspaces and tabs independently. Different tabs fit their viewing clients; when clients share a tab, the last one to interact with it controls its size. (#3526)\n- Added Muse agent detection for idle, working, approval, and question states. (#2489, thanks @ohk)\n- Sidebar text and metadata tokens can now change color, boldness, and dimming based on their values, using ordered text or numeric rules. (#3693)\n- Custom themes can now define separate light and dark color overrides when automatic theme switching is enabled. (#2324, thanks @aneym)\n- `ui.pane_borders = \"always\"` can now frame a single pane when outer borders are enabled. `\"auto\"` keeps split-only borders, `\"off\"` hides them, and existing boolean values keep working. (#3234, thanks @rsmdt)\n\n### Changed\n- Client updates can now leave compatible servers and their running agents untouched. Missing server features disable only the affected action instead of preventing connection. Servers older than endpoint generation 1 need a one-time upgrade. Replacing a remote server asks before stopping its pane processes, with No as the default answer; experimental handoff remains opt-in. (#3509)\n- The terminal UI now runs in each client, reducing redraw work in busy multi-client sessions and keeping themes, menus, copy mode, and other presentation settings local to the viewing machine. (#3487)\n- Idle terminal scrollback now uses less memory without reducing retained history or changing reads and resizing. (#3556)\n- Pane images and the graphics API are now enabled by default in compatible terminals. Set `terminal.kitty_graphics = false` to disable them; the old `experimental.kitty_graphics` setting remains accepted.\n- Closing a primary workspace with open worktree workspaces now requires explicit group intent: `workspace close --group` or `workspace.close` with `close_group: true`. Otherwise the whole group stays open. (#2874)\n- New lifecycle event subscriptions now start with live events rather than replaying retained history. API clients should subscribe before taking their initial snapshot to avoid missing changes. (#1270)\n\n### Fixed\n- Mouse selections now stay visible and copyable while terminal output continues, including with automatic copying disabled. Ctrl+C and Cmd+C copy a selection even before a delayed mouse release, and a failed copy no longer interrupts the agent. Selection highlights also remain visible when host colors are unavailable. (#3100, #2708, #3684, thanks @moret and @Pimpmuckl)\n- Wayland clipboard copies no longer freeze Herdr while `wl-copy` serves the selection. (#3014)\n- Live handoff now preserves mouse forwarding for running pane applications. (#3000, thanks @xkrogen)\n- Interrupted pane exits during host shutdown no longer replace the saved session with an empty session or a new default workspace. (#3415)\n- SSH clients whose terminal disappears now detach instead of resizing running panes to a fallback size and triggering expensive history reflow. (#3519)\n- Focusing a workspace now scrolls the sidebar to keep it visible. (#3554)\n- Removing a background worktree workspace no longer changes focus to its parent. Windows worktrees can also be removed while their agent panes are running, without a replacement shell locking the checkout again. (#3098, #3532)\n- Worktree commands can now trust a verified repository for one request with `--trust-repository`, including accessible Windows repositories owned by another SID, without changing global Git configuration. (#3044)\n- Oversized Kitty images no longer prevent smaller images from appearing, and image replacements no longer redraw or disappear one row at a time. Direct graphics stay bound to the client that owns them. (#3033, #3166, #3549, thanks @kataokatsuki)\n- Pixel mouse coordinates remain correct when pane applications reassert SGR mouse reporting. (#3295)\n- Prefix bindings such as `prefix+|` now recognize characters produced by macOS Option and custom keyboard layouts, while exact chords keep priority. Arrow navigation also works when terminals such as Alacritty attach text to special-key reports. (#3079, #3328, thanks @vlcinsky)\n- Direct terminal attaches now honor `ui.mouse_capture` and preserve multiline pastes as one paste instead of submitting each line separately. (#2992, #3054)\n- `agent prompt` now reliably sends the prompt and Enter before reporting successful submission. With `--wait`, prompts sent to a non-working agent require observed working or blocked activity, so unrelated state changes cannot complete the wait. Pending submissions fail cleanly if the terminal exits. (#3506, #3685)\n- Long Codex prompts on WindowLine truncated
+  "body": "### Added\n- Control agents, panes, workspaces, and worktrees on saved SSH machines with `herdr --machine <label-or-id>`. Commands use the saved machine's session without needing an open Herdr window. Update Herdr on both machines to use CLI forwarding; failed remote commands never fall back to Local. (#3918)\n- Connect to Windows SSH hosts from Linux, macOS, or Windows. Interactive setup can install or update the complete Windows package after confirmation; background reconnects never install updates. (#3651, #3701, #3661, #3687, thanks @JJLiebig)\n- Edit names, filters, and search text at the cursor instead of only at the end. Herdr inputs now support character and word movement, Home/End, deletion, and familiar Ctrl+A/E/K/U/W/Y shortcuts, including Unicode text. (#1803, #3698, thanks @markjaquith)\n- Added Letta Code detection and native conversation restore, including default conversations. Its experimental integration is installed through `herdr integration install letta`, not the Settings integration list or JSON integration API. (#3106, #3107, thanks @just-cameron)\n- Hold Ctrl over a link to highlight it before opening it. Wrapped URLs and OSC 8 links remain clickable even when their beginning or end is outside the viewport. (#1282)\n- Sidebar token rules can now hide matching tokens and their separators with `hide = true`; rows disappear when no tokens remain. (#3925)\n\n### Changed\n- Workspace keyboard navigation now spans connected machines in sidebar order, with a visible highlight before Enter switches machines. Collapsed machine and worktree groups remain navigable without accidentally sending actions to the wrong machine. (#3754)\n- Experimental live handoff can now transfer more than 64 panes when the sending server includes this update. An older running server still has its old limit for the first upgrade; this does not change update installation order or make live handoff non-experimental. (#3393, #3411, thanks @kataokatsuki)\n- On Linux and macOS, terminal observers that stop accepting output are disconnected after 30 seconds without write progress. Their pane and other clients keep running; an interrupted stream may end without a final close record. (#3612)\n- Windows terminal cleanup now explicitly resets mouse-reporting modes. The remaining standalone Git Bash detach report in #3748 is still under investigation; do not treat this release as a confirmed fix for that report. (#4055, thanks @JJLiebig)\n\n### Fixed\n- Remote typing, switching, and popup interaction no longer resend the entire pane screen for small changes. Busy SSH sessions use less bandwidth, and idle attached clients avoid unnecessary redraw work. (#3769, #3745, #3822)\n- A stalled SSH machine no longer traps the client away from Local. Clicking a local workspace or agent cancels the unfinished remote switch, and a recovered remote workspace refreshes without an away-and-back selection. Stale screens from before a reconnect are not reused. (#3903, #3842)\n- Idle SSH connections use less CPU without losing final output. Repeated connection failures back off instead of reconnecting rapidly, and supported idle bridges clean up without stopping remote panes. (#3728, #4083)\n- Large pastes no longer disconnect the client with an output-queue error. (#3833)\n- SSH setup now shows authentication instructions and useful errors, including Tailscale login URLs and host-key failures, rather than appearing to hang or only reporting a lost connection. `machine add` also accepts options before the SSH target. (#3606, #3731, #3883)\n- Machine and worktree groups collapse correctly without changing the selected workspace. The sidebar respects workspace row gaps, stays stable during resizing, and reveals newly focused workspaces. (#3778, #3738, #3817)\n- The agent list keeps its scroll position when switching machines. Current-workspace and current-tab filters distinguish identical IDs on different machines. (#3937, #4101, #3732, thanks @minatoaquaMK2)\n- Background machine activation no longer resizes another client's focused pane. Window titles follow each client's own view rather than another client's selection. (#3744, #4091, #4130, thanks @JJLiebig)\n- `agent focus` and `pane move --focus` now move attached clients to the requested pane. Moving without focus no longer leaves a client following a deleted tab or later unrelated focus changes. (#3760, #4153, #4171, thanks @minatoaquaMK2)\n- Creating a worktree focuses its new workspace again. Partially failed worktree removals can be retried, and worktrees with submodules offer an explicit forced-removal choice rather than failing without a recovery action. (#3766, #3314, #1797)\n- Temporary worktree-action error banners expire instead of remaining on screen indefinitely. (#1827, #4063, thanks @JJLiebig)\n- The last tab remains fully visible when the tab strip overflows, and the session navigator once again draws connected tree branches. (#4151, #3843)\n- Muted sidebar andLine truncated
   "show_on_startup": true
 }

herdr/.config/herdr/scripts/apply-home-with-lazygit.sh

@@ -10,6 +10,7 @@ TARGET_DIR="$(realpath ~/dotfiles)"
 # Close any existing versions of these workspaces so this is idempotent.
 herdr workspace close Home 2>/dev/null || true
 herdr workspace close Dotfiles 2>/dev/null || true
+herdr workspace close Coding 2>/dev/null || true
 
 # Apply the layout file, which creates both workspaces.
 "$SPREADER" apply --file "$CONFIG_DIR/home.yml"

herdr/.config/herdr/sessions/home/session-history.json

@@ -5,45 +5,33 @@
       "tabs": [
         {
           "panes": {
-            "1": {
+            "2": {
-              "ansi": "\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                                                                                                            \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
+              "ansi": "\u001b[0m\u001b[38;5;6m~\u001b[0m\r\n \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[7m\u001b[38;5;4m liph     \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m\u001b[0m\u001b[7m\u001b[38;5;4m .atuin                 \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;5;6m/home/liph/\u001b[0m\u001b[1m\u001b[38;5;4m.atuin\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cache                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m└── \u001b[0m\u001b[38;5;4m \u001b[0m\u001b[1m\u001b[38;5;4mlogs\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cargo                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m    ├── \u001b[0m search.log.2026-09-17\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.claude                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m    ├── \u001b[0m search.log.2026-09-18\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;255;152;0m \u001b[0m\u001b[38;5;4m.config                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m    └── \u001b[0m search.log.2026-09-20\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.gnupg                  \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.local                  \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.locale                 \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.mozilla                \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.npm                    \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.password-store         \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.pi\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/pi/.pi\u001b[0m\u001b[38;5;4m  \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.pyenv                  \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.rustup                 \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.ssh\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/ssh/.\u001b[0m\u001b[38;5;4m… \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.w3m                    \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4maerc_back\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/\u001b[0m\u001b[38;5;4m… \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4mcloud\u001b[0m\u001b[3m\u001b[38;5;4m -> /mnt/tank/clo\u001b[0m\u001b[38;5;4m… \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4mcode\u001b[0m\u001b[3m\u001b[38;5;4m -> /mnt/tank/code\u001b[0m\u001b[38;5;4m  \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;0;188;212m \u001b[0m\u001b[38;5;4mDocuments               \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4mdotfiles                \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;0;188;212m \u001b[0m\u001b[38;5;4mDownloads               \u001b[0m\u001b[38;5;7m│\u001b[0m\r\n              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0Line truncated
-              "lines": 4
+              "lines": 35
-            }
-          }
-        }
-      ]
-    },
-    {
-      "tabs": [
-        {
-          "panes": {
-            "3": {
-              "ansi": "\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2my\u001b[0m",
-              "lines": 1
             },
-            "10": {
+            "1": {
-              "ansi": "\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: No route to host\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m serv\r\nssh: connect to host 100.69.72.2 port 50100: No route to host\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[4m\u001b[38;5;2msudo\u001b[0m \u001b[0m\u001b[38;5;2mmount\u001b[0m -a\r\n[sudo] password for liph: \r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: No route to host\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[4m\u001b[38;5;2msudo\u001b[0m \u001b[0m\u001b[38;5;2msystemctl\u001b[0m restart NetworkManager\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mcd\u001b[0m lxc\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2my\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                    \u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mpoc\u001b[0m\r\n6654fbb30b130b1cae3e28dda06026e17948ff9e8db777e31d0a628f15d3f8c7\r\naad6289ca337b3ce76896f2e7e61480490152886c7828120371fb28e6b779e1d\r\nledger_db\r\nledger_server\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mexit\u001b[0m\r\nConnection to 100.69.98.79 closed.\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mrebo\u001b[0m\r\nGenerating grub configuration file ...\r\nWarning: os-prober will not be executed to detect other bootable partitions.\r\nSystems on them will not be added to the GRUB boot configuration.\r\nCheck GRUB_DISABLE_OS_PROBER documentation entry.\r\nAdding boot menu entry for UEFI Firmware Settings ...\r\ndone\r\n\r\n\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles/nvim/.config/nvim/lua/plugins\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
+              "ansi": "\u001b[0m\u001b[38;5;6m~\u001b[0m   \r\n \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[7m\u001b[38;5;4m liph      \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.atuin                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m󰲂 \u001b[0m\u001b[38;5;6m/home/liph/\u001b[0m\u001b[1m\u001b[38;5;4mDocuments\u001b[0m                    \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cache                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m├── \u001b[0m\u001b[38;5;4m \u001b[0m\u001b[1m\u001b[38;5;4mdemo\u001b[0m    \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cargo                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m .latexmkrc           \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.claude                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-INT.tex\u001b[0m                    \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;255;152;0m \u001b[0m\u001b[38;5;4m.config                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-INT.tex.build.tex\u001b[0m\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.gnupg                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-INT.tex.stripped.tex\u001b[0m       \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.local                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-MISC.tex\u001b[0m\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.locale                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m ap_transaction.csv              \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.mozilla                \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m ap_transaction.html\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.npm                    \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3map_transaction.tex\u001b[0m\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.password-store         \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m ar_transaction.csv\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.pi\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/pi/.pi\u001b[0m\u001b[38;5;4m  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m ar_transaction.html\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.pyenv                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3mar_transaction.tex\u001b[0m\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.rustup                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m balance_sheet.aux\u001b[0m \r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.ssh\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/ssh/.\u001b[0m\u001b[38;5;4m… \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m balance_sheet.csv\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.w3m                    \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   ├── \u001b[0m\u001b[38;5;3m balance_sheet.fdb_latexmk\u001b[0m\r\n               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38Line truncated
-              "lines": 29
+              "lines": 35
             }
           }
         },
         {
           "panes": {
             "4": {
-              "ansi": "   at YoutubeExplode.Videos.Streams.StreamClient.GetStreamInfosAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 272\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetManifestAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 309\r\n   at Jellyfin.Plugin.Themerr.YoutubeClientWrapper.DownloadAudioAsync(String videoUrl, String destination)\r\n   at Jellyfin.Plugin.Themerr.ThemerrManager.SaveMp3(String destination, String videoUrl)\r\n[19:47:05] [ERR] [45] Jellyfin.Plugin.Themerr.ThemerrManager: Unable to download https://www.youtube.com/watch?v=gjVDYxWnj40 to /data/movies/Good Luck Have Fun Dont Die (2026) {tmdb-1119449}/theme.mp3\r\nYoutubeExplode.Exceptions.VideoUnavailableException: Video 'gjVDYxWnj40' is not available.\r\n   at YoutubeExplode.Videos.VideoController.GetPlayerResponseAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/VideoController.cs:line 146\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetStreamInfosAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 272\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetManifestAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 309\r\n   at Jellyfin.Plugin.Themerr.YoutubeClientWrapper.DownloadAudioAsync(String videoUrl, String destination)\r\n   at Jellyfin.Plugin.Themerr.ThemerrManager.SaveMp3(String destination, String videoUrl)\r\n[19:47:06] [ERR] [70] Jellyfin.Plugin.Themerr.ThemerrManager: Unable to download https://www.youtube.com/watch?v=xzefbu2ye3c to /data/series/House of the Dragon (2022) {tvdb-371572}/theme.mp3\r\nYoutubeExplode.Exceptions.VideoUnavailableException: Video 'xzefbu2ye3c' is not available.\r\n   at YoutubeExplode.Videos.VideoController.GetPlayerResponseAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/VideoController.cs:line 146\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetStreamInfosAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 272\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetManifestAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 309\r\n   at Jellyfin.Plugin.Themerr.YoutubeClientWrapper.DownloadAudioAsync(String videoUrl, String destination)\r\n   at Jellyfin.Plugin.Themerr.ThemerrManager.SaveMp3(String destination, String videoUrl)\r\n[19:47:06] [ERR] [70] Jellyfin.Plugin.Themerr.ThemerrManager: Unable to download https://www.youtube.com/watch?v=6pvyYEvlHCI to /data/movies/A House of Dynamite (2025) {tmdb-1290159}/theme.mp3\r\nYoutubeExplode.Exceptions.VideoUnavailableException: Video '6pvyYEvlHCI' is not available.\r\n   at YoutubeExplode.Videos.VideoController.GetPlayerResponseAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/VideoController.cs:line 146\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetStreamInfosAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 272\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetManifestAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 309\r\n   at Jellyfin.Plugin.Themerr.YoutubeClientWrapper.DownloadAudioAsync(String videoUrl, String destination)\r\n   at Jellyfin.Plugin.Themerr.ThemerrManager.SaveMp3(String destination, String videoUrl)\r\n[19:47:06] [ERR] [70] Jellyfin.Plugin.Themerr.ThemerrManager: Unable to download https://www.youtube.com/watch?v=RxabLA7UQ9k to /data/movies/Inception (2010) {tmdb-27205}/theme.mp3\r\nYoutubeExplode.Exceptions.VideoUnavailableException: Video 'RxabLA7UQ9k' is not available.\r\n   at YoutubeExplode.Videos.VideoController.GetPlayerResponseAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/VideoController.cs:line 146\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetStreamInfosAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 272\r\n   at YoutubeExplode.Videos.Streams.StreamClient.GetManifestAsync(VideoId videoId, CancellationToken cancellationToken) in /_/YoutubeExplode/Videos/Streams/StreamClient.cs:line 309\r\n   at Jellyfin.Plugin.Themerr.YoutubeClientWrapper.DownloadAudioAsync(String videoUrl, String destination)\r\n   at Jellyfin.Plugin.Themerr.ThemerrManager.SaveMp3(String destination, String videoUrl)\r\n[19:47:06] [ERR] [70] Jellyfin.Plugin.Themerr.ThemerrManager: Unable to download https://www.youtube.com/watch?v=qwTop2qs1tE to /data/series/IT Welcome to Derry (2025) {tvdb-418424}/theme.mp3\r\nYoutubeExplode.Exceptions.VideoUnavaLine truncated
+              "ansi": "\r\n\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles/aerc/.config/aerc\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
-              "lines": 4061
+              "lines": 3
             },
-            "5": {
+            "3": {
-              "ansi": "\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\n^C\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: Connection timed out\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: Connection timed out\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: Connection timed out\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m serv\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mexit\u001b[0m\r\nConnection to 100.69.72.2 closed.\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m seco\r\nssh: connect to host 100.69.98.79 port 50101: Connection timed out\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m cadd\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mnvim\u001b[0m \u001b[0m\u001b[4m/etc/caddy/Caddyfile\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;3mFound existing alias for \u001b[0m\u001b[1m\u001b[38;5;5m\"nvim\"\u001b[0m\u001b[1m\u001b[38;5;3m. You should use: \u001b[0m\u001b[1m\u001b[38;5;5m\"nv\"\u001b[0m\r\n\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[38;5;2mcaddy\u001b[0m validate --config \u001b[0m\u001b[4m/etc/caddy/Caddyfile\u001b[0m\r\n2026/09/09 08:08:04.733 \u001b[0m\u001b[38;5;4mINFO    \u001b[0musing config from file  {\"file\": \"/etc/caddy/Caddyfile\"}\r\n2026/09/09 08:08:04.762 \u001b[0m\u001b[38;5;3mWARN    \u001b[0mcaddyfile       Using a path in a site address is deprecated; please use the 'handle' directive instead      {\"address\": \"http://jitsi.liphlink.xyz/etherpad/\"}\r\n2026/09/09 08:08:04.773 \u001b[0m\u001b[38;5;4mINFO    \u001b[0madapted config to JSON  {\"adapter\": \"caddyfile\"}\r\n2026/09/09 08:08:04.773 \u001b[0m\u001b[38;5;3mWARN    \u001b[0mCaddyfile input is not formatted; run 'caddy fmt --overwrite' to fix inconsistencies {\"adapter\": \"caddyfile\", \"file\": \"/etc/caddy/Caddyfile\", \"line\": 54}\r\n2026/09/09 08:08:04.786 \u001b[0m\u001b[38;5;4mINFO    \u001b[0mhttp.auto_https server is listening only on the HTTPS port but has no TLS connection policies; adding one to enable TLS      {\"server_name\": \"srv0\", \"https_port\": 443}\r\n2026/09/09 08:08:04.787 \u001b[0m\u001b[38;5;4mINFO    \u001b[0mhttp.auto_https enabling automatic HTTP->HTTPS redirects     {\"server_name\": \"srv0\"}\r\n2026/09/09 08:08:04.789 \u001b[0m\u001b[38;5;4mINFO    \u001b[0mtls.cache.maintenance   started background certificate maintenance   {\"cache\": \"0x18df3147c500\"}\r\n2026/09/09 08:08:04.821 \u001b[0m\u001b[38;5;4mINFO    \u001b[0mtls.cache.maintenance   stopped background certificate maintenance   {\"cache\": \"0x18df3147c500\"}\r\n2026/09/09 08:08:04.821 \u001b[0m\u001b[38;5;4mINFO    \u001b[0mhttp    servers shutting down with eternal grace period\r\nValid configuration\r\n\r\n\u001b[0m\u001b[38;5;5mcaddy liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m Read from remote host 100.69.98.182: Connection reset by peer\r\nConnection to 100.69.98.182 closed.\r\nclient_loop: send disconnect: Broken pipe\r\n\u001b[0m\u001b[38;5;1m❯ \u001b[0m\u001b[38;5;2mssh\u001b[0m immi\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[4m\u001b[38;5;2msudo\u001b[0m \u001b[0m\u001b[38;5;2mmkdir\u001b[0m -p /etc/containers/storage.conf.d\r\n\u001b[0m\u001b[4m\u001b[38;5;2msudo\u001b[0m \u001b[0m\u001b[38;5;2mtee\u001b[0m /etc/containers/storage.conf.d/10-overlay.conf \u001b[0m\u001b[38;5;3m<<'EOF'\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;1m[storage]\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;1mdriver\u001b[0m = \u001b[0m\u001b[38;5;3m\"overlay\"\u001b[0m\r\n\r\n\u001b[0m\u001b[1m\u001b[38;5;1m[storage.options.overlay]\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;1mmount_program\u001b[0m = \u001b[0m\u001b[38;5;3m\"/usr/bin/fuse-overlayfs\"\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;1mmountopt\u001b[0m = \u001b[0m\u001b[38;5;3m\"nodev\"\u001b[0m\r\n\u001b[0m\u001b[1m\u001b[38;5;1mEOF\u001b[0m\r\n[storage]\r\ndriver = \"overlay\"\r\n\r\n[storage.options.overlay]\r\nmount_program = \"/usr/bin/fuse-overlayfs\"\r\nmountopt = \"nodev\"\r\n\u001b[0m\u001b[38;5;5m❯ \u001b[0m\u001b[4m\u001b[38;5;2msudo\u001b[0m \u001b[0m\u001b[38;5;2mpacman\u001b[0m -S fuse-overlayfs\r\nresolving dependencies...\r\nlooking for conflicting packages...\r\n\r\n\u001b[0m\u001b[1mPackages (3)\u001b[0m fuse-common\u001b[0m\u001b[38;5;243m-3.18.2-1\u001b[0m  fuse3\u001b[0m\u001b[38;5;243m-3.18.2-1\u001b[0m  fuse-overlayfs\u001b[0m\u001b[38;5;243m-1.18-1\u001b[0m\r\n\r\n\u001b[0m\u001b[1mTotal Download Size: \u001b[0m  0.18 MiB\r\n\u001b[0m\u001b[1mTotal Installed Size:\u001b[0m  0.59 MiB\r\n\r\n\u001b[0m\u001b[1m\u001b[38;5;4m::\u001b[0m\u001b[1m Proceed with installation? [Y/n] \u001b[0my\r\n\u001b[0m\u001b[1m\u001b[38;5;4m::\u001b[0m\u001b[1m Retrieving packages...\u001b[0m\r\n fuse-common-3.18....     2.7 KiB  17Line truncated
+              "ansi": "\r\n\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
-              "lines": 787
+              "lines": 3
             }
           }
         },
         {
           "panes": {
-            "6": {
+            "5": {
-              "ansi": "\u001b[0m\u001b[1m\u001b[38;2;234;154;151m\u001b[48;2;35;33;54m phil \u001b[0m\u001b[48;2;35;33;54m spam  proton                                                                                                                                                             \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                [..]             \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                       [..]                                                                   \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                                                                              \u001b[0m\r\n\u001b[0m\u001b[38;2;110;106;134m                                 \u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m                                                                                              Line truncated
+              "ansi": "\u001b[0m\u001b[1m\u001b[38;2;234;154;151m\u001b[48;2;35;33;54m phil \u001b[0m\u001b[48;2;35;33;54m spam  proton                                                                                                                                                             \u001b[0m\r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54m+Action                         0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;234;154;151m      HealPlayLove Connected <no-reply@notification.…  Walk & Talk Gathering – Regensberg to Baden                                     Sep 18\u001b[0m\u001b[38;2;35;33;54m\u001b[48;2;110;106;134m \u001b[0m\r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mArchive                         1\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m\u001b[48;2;42;39;63m  a   Liph <liiph@proton.me>                           another test                                                                    Sep 18\u001b[0m\u001b[38;2;35;33;54m\u001b[48;2;110;106;134m \u001b[0m\r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54m+Community                      0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m\u001b[48;2;42;39;63m  a   Liph <liiph@proton.me>                           test email                                                                      Sep 18\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mDrafts                          0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   HealPlayLove Connected <no-reply@notification.…  Wild Women Gathering - special HPL discount                                     Sep 18\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mEverything              636 / 992\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   younity - find your flow! Festival <hello@youn…  David Gihyam - neuer Speaker am find your flow!                                 Sep 18\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mFinance                         0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m\u001b[48;2;42;39;63m      Heal Play Love <hello@healplaylove.ch>           This moment gave us goosebumps                                                  Sep 18\u001b[0m \r\n\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;234;154;151mInbox                   166 / 337\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   Wise <noreply@info.wise.com>                     Ready to earn a return?                                                         Sep 16\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mJunk                            0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   Universal Sounds Schweiz <info@universalsounds…  Deva Premal & Miten, Ape Chimba & die schönsten Bilder vom OpenAir              Sep 15\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54m+Mail                           0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   HealPlayLove Connected <no-reply@notification.…  Sa, 19.9 | DayRave@Oerlikon                                                     Sep 15\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mNewsletters                     0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   Megan | Unity Breathwork <megan@unitybreathwor…  Ready for a deep reset? Join us for free September 27 💫                        Sep 14\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mPersonal                        0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;134m\u001b[48;2;42;39;63m  a   phil <liiph@protonmail.com>                      test                                                                            Sep 14\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54m+Priority                       0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[1m\u001b[38;2;224;222;244m\u001b[48;2;42;39;63m  O   Dr Joe Dispenza - younity <hello@younity.team>   Erlebe Dr Joe 2027 LIVE - Jetzt Ticket sichern!                                 Sep 13\u001b[0m \r\n\u001b[0m\u001b[38;2;156;207;216m\u001b[48;2;35;33;54mPriority1                       0\u001b[0m\u001b[1m\u001b[38;2;35;33;54m\u001b[48;2;35;33;54m│\u001b[0m\u001b[38;2;110;106;1Line truncated
-              "lines": 39
+              "lines": 37
             }
           }
         }
@@ -53,17 +41,33 @@
       "tabs": [
         {
           "panes": {
-            "7": {
+            "6": {
-              "ansi": "\u001b[0m\u001b[38;5;6m~\u001b[0m              \r\n \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[7m\u001b[38;5;4m liph             \u001b[0m\u001b[38;5;4m\u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.atuin                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;6m /home/liph/scripts\u001b[0m \u001b[0m\u001b[1m\u001b[38;5;8m->\u001b[0m \u001b[0m\u001b[38;5;6m/mnt/tank/\u001b[0m\u001b[1m\u001b[38;5;4mscripts\u001b[0m\r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cache                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m├── \u001b[0m\u001b[38;5;4m \u001b[0m\u001b[1m\u001b[38;5;4mledger\u001b[0m             \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.cargo                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│   └── \u001b[0m\u001b[38;5;4m \u001b[0m\u001b[1m\u001b[38;5;4mcustom\u001b[0m                \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;255;152;0m \u001b[0m\u001b[38;5;4m.config                                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-INT.tex\u001b[0m              \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.gnupg                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3m1099-MISC.tex\u001b[0m        \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.local                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m ap_transaction.csv     \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.locale                                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m ap_transaction.html \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.mozilla                                \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3map_transaction.tex\u001b[0m                  \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.npm                                    \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m ar_transaction.csv  \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.pi\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/pi/.pi\u001b[0m\u001b[38;5;4m                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m ar_transaction.html                  \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.pyenv                                  \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3mar_transaction.tex\u001b[0m                   \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;3;169;244m \u001b[0m\u001b[38;5;4m.rustup                                 \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m balance_sheet.csv                    \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4m.ssh\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/ssh/.ssh\u001b[0m\u001b[38;5;4m               \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m balance_sheet.html                                 \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \u001b[0m\u001b[38;2;158;158;158m \u001b[0m\u001b[38;5;4maerc\u001b[0m\u001b[3m\u001b[38;5;4m -> dotfiles/aerc/aerc\u001b[0m\u001b[38;5;4m              \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[1m\u001b[38;5;8m│       ├── \u001b[0m\u001b[38;5;3m \u001b[0m\u001b[1m\u001b[38;5;3mbalance_sheet.tex\u001b[0m                                  \r\n                      \u001b[0m\u001b[38;5;7m│\u001b[0m\u001b[38;5;4m \uLine truncated
+              "ansi": "yazi\r\nkk\u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                                                                 \u001b[0m\u001b[38;5;5m❯ \u001b[0myazi\r\n                                                                                                                                     \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                                                                  \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                                                                 \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
-              "lines": 37
+              "lines": 5
             },
-            "8": {
+            "10": {
-              "ansi": "╭─[1]─Status──────────────────────────╮╮\r\n│\u001b[0m\u001b[38;5;2m✓\u001b[0m dotfiles → main                    ││\r\n╰─────────────────────────────────────╯│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╭─[2]─Files \u001b[0m- Worktrees - Submodules\u001b[0m\u001b[1m\u001b[38;5;2m──╮\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m▼ /                                  \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ herdr/.config/herdr/sessions/home\u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m session-history.json          \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m session.json                  \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ herdr_1/.config/herdr/plugins    \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    ▼ .tmp-install-750065-17853119876\u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mD\u001b[0m checkout                    \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    ▼ github                         \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mD\u001b[0m herdr-bar-96eebe452a9c      \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mD\u001b[0m herdr-lazygit-b11d62e75f78  \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mD\u001b[0m herdr-spreader-f248c87aa2e2 \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mD\u001b[0m herdr-zoxide-f7b96c313637   \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╰────────────────────────────15 of 15─╯\u001b[0m│\r\n╭─[3]─\u001b[0m\u001b[38;5;2mLocal branches \u001b[0m- Remotes - Tags─╮│\r\n│\u001b[0m\u001b[38;5;2m  *\u001b[0m main \u001b[0m\u001b[38;5;2m✓\u001b[0m                           ││\r\n│                                     ││\r\n│                                     ││\r\n│                                     ││\r\n│                                     ││\r\n╰──────────────────────────────1 of 1─╯│\r\n╭─[4]─\u001b[0m\u001b[38;5;2mCommits \u001b[0m- Reflog────────────────╮│\r\n│\u001b[0m\u001b[38;5;2m893fe34a\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m updated dotfiles       ▐│\r\n│\u001b[0m\u001b[38;5;2m89b1e380\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m udated colorscheme     ││\r\n│\u001b[0m\u001b[38;5;2me078b218\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m changed to tokyo night ││\r\n│\u001b[0m\u001b[38;5;2m82af2452\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m hyprlock changes       ││\r\n│\u001b[0m\u001b[38;5;2m0eaac74d\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m updated zshrc          ││\r\n╰─────────────────────────────1 of 77─╯╯\r\n╭─[5]─Stash───────────────────────────╮╮\r\n│\u001b[0m\u001b[38;5;6m1d\u001b[0m On main: tmp install              ││\r\n╰──────────────────────────────1 of 1─╯╯\r\n\u001b[0m\u001b[38;5;4mStage: <space\u001b[0m \u001b[0m\u001b[4m\u001b[38;5;5mDonate\u001b[0m \u001b[0m\u001b[4m\u001b[38;5;3mAsk Question\u001b[0m 0.63.0\u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                     \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                    \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m ",
+              "ansi": "╭─[1]─Status─────╮╮\r\n│\u001b[0m\u001b[38;5;2m✓\u001b[0m dotfiles → mai│▐\r\n╰────────────────╯│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╭─[2]─Files \u001b[0m- Wo\u001b[0m\u001b[1m\u001b[38;5;2m─╮\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m\u001b[1m\u001b[48;5;4m▼ /             \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ aerc/.config\u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m AGENTS.md\u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m accounts.\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m aerc.conf\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    \u001b[0m\u001b[38;5;1m??\u001b[0m aerc.conf\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    \u001b[0m\u001b[38;5;1m??\u001b[0m aerc.conf\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m binds.con\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    \u001b[0m\u001b[38;5;1m??\u001b[0m binds.con\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ herdr/.confi\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    ▼ plugins/co\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mM\u001b[0m home.ym\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╰────────1 of 61─╯\u001b[0m│\r\n╭─[3]─\u001b[0m\u001b[38;5;2mLocal bran\u001b[0m─╮│\r\n│\u001b[0m\u001b[38;5;2m  *\u001b[0m main \u001b[0m\u001b[38;5;2m✓\u001b[0m      ││\r\n│                ││\r\n│                ││\r\n│                ││\r\n│                ││\r\n╰─────────1 of 1─╯│\r\n╭─[4]─\u001b[0m\u001b[38;5;2mCommits \u001b[0m- ─╮│\r\n│\u001b[0m\u001b[38;5;2md1b2fbdf\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m up▐│\r\n│\u001b[0m\u001b[38;5;2m893fe34a\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m up││\r\n│\u001b[0m\u001b[38;5;2m89b1e380\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m ud││\r\n│\u001b[0m\u001b[38;5;2me078b218\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m ch││\r\n│\u001b[0m\u001b[38;5;2m82af2452\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m hy││\r\n╰────────1 of 78─╯╯\r\n╭─[5]─Stash──────╮╮\r\n│\u001b[0m\u001b[38;5;6m1w\u001b[0m On main: tmp ││\r\n╰─────────1 of 1─╯╯\r\n \u001b[0m\u001b[4m\u001b[38;5;5mDonate\u001b[0m \u001b[0m\u001b[4m\u001b[38;5;3mAsk Questio\u001b[0m",
+              "lines": 35
+            },
+            "7": {
+              "ansi": "╭─[1]─Status──────────────────────────╮╮\r\n│\u001b[0m\u001b[38;5;2m✓\u001b[0m dotfiles → main                    │▐\r\n╰─────────────────────────────────────╯│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╭─[2]─Files \u001b[0m- Worktrees - Submodules\u001b[0m\u001b[1m\u001b[38;5;2m──╮\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m\u001b[1m\u001b[48;5;4m▼ /                                  \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ aerc/.config/aerc                \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m AGENTS.md                     \u001b[0m\u001b[1m\u001b[38;5;2m▐\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m accounts.conf                 \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m aerc.conf                     \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    \u001b[0m\u001b[38;5;1m??\u001b[0m aerc.conf.pre-attach          \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m binds.conf                    \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    \u001b[0m\u001b[38;5;1m??\u001b[0m binds.conf.pre-M              \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m  ▼ herdr/.config/herdr              \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m    ▼ plugins/config/herdr-spreader  \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m       \u001b[0m\u001b[38;5;1mM\u001b[0m home.yml                    \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m     \u001b[0m\u001b[38;5;1mM\u001b[0m release-notes.json            \u001b[0m\u001b[1m\u001b[38;5;2m│\u001b[0m│\r\n\u001b[0m\u001b[1m\u001b[38;5;2m╰─────────────────────────────1 of 52─╯\u001b[0m│\r\n╭─[3]─\u001b[0m\u001b[38;5;2mLocal branches \u001b[0m- Remotes - Tags─╮│\r\n│\u001b[0m\u001b[38;5;2m  *\u001b[0m main \u001b[0m\u001b[38;5;2m✓\u001b[0m                           ││\r\n│                                     ││\r\n│                                     ││\r\n│                                     ││\r\n│                                     ││\r\n╰──────────────────────────────1 of 1─╯│\r\n╭─[4]─\u001b[0m\u001b[38;5;2mCommits \u001b[0m- Reflog────────────────╮│\r\n│\u001b[0m\u001b[38;5;2md1b2fbdf\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m updated nvim treesitter▐│\r\n│\u001b[0m\u001b[38;5;2m893fe34a\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m updated dotfiles       ││\r\n│\u001b[0m\u001b[38;5;2m89b1e380\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m udated colorscheme     ││\r\n│\u001b[0m\u001b[38;5;2me078b218\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m changed to tokyo night ││\r\n│\u001b[0m\u001b[38;5;2m82af2452\u001b[0m \u001b[0m\u001b[38;2;36;244;94mli\u001b[0m \u001b[0m\u001b[38;2;36;244;94m○\u001b[0m hyprlock changes       ││\r\n╰─────────────────────────────1 of 78─╯╯\r\n╭─[5]─Stash───────────────────────────╮╮\r\n│\u001b[0m\u001b[38;5;6m1w\u001b[0m On main: tmp install              ││\r\n╰──────────────────────────────1 of 1─╯╯\r\n\u001b[0m\u001b[38;5;4mStage: <space\u001b[0m \u001b[0m\u001b[4m\u001b[38;5;5mDonate\u001b[0m \u001b[0m\u001b[4m\u001b[38;5;3mAsk Question\u001b[0m 0.63.0\u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                     \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                    \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfil\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~/dotfiles\u001b[0m\u001b[38;5;3m main* \u001b[0m\r\n\u001b[Line truncated
               "lines": 37
             }
           }
         }
       ]
+    },
+    {
+      "tabs": [
+        {
+          "panes": {
+            "8": {
+              "ansi": "\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m/mnt/tank/code\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[1m\u001b[7m%\u001b[0m                                                                                   \u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5march liph \u001b[0m\u001b[38;5;4m~\u001b[0m\r\n\u001b[0m\u001b[38;5;5m❯\u001b[0m \u001b[0m\u001b[38;5;2mcd\u001b[0m \u001b[0m\u001b[4mdot\u001b[0m ",
+              "lines": 4
+            }
+          }
+        }
+      ]
     }
   ]
 }

herdr/.config/herdr/sessions/home/session.json

@@ -2,47 +2,17 @@
   "version": 3,
   "workspaces": [
     {
-      "id": "w4",
+      "id": "w0",
-      "custom_name": null,
-      "identity_cwd": "/home/liph",
-      "public_pane_numbers": {
-        "1": 1
-      },
-      "next_public_pane_number": 2,
-      "public_tab_numbers": [
-        1
-      ],
-      "next_public_tab_number": 2,
-      "tabs": [
-        {
-          "custom_name": null,
-          "layout": {
-            "Pane": 1
-          },
-          "panes": {
-            "1": {
-              "cwd": "/home/liph"
-            }
-          },
-          "zoomed": false,
-          "focused": 1,
-          "root_pane": 1
-        }
-      ],
-      "active_tab": 0
-    },
-    {
-      "id": "w5",
       "custom_name": "Home",
-      "identity_cwd": "/home/liph/dotfiles/nvim/.config/nvim/lua",
+      "identity_cwd": "/mnt",
       "public_pane_numbers": {
-        "6": 5,
+        "1": 1,
-        "10": 10,
+        "5": 5,
         "4": 4,
-        "3": 6,
+        "2": 2,
-        "5": 8
+        "3": 3
       },
-      "next_public_pane_number": 11,
+      "next_public_pane_number": 6,
       "public_tab_numbers": [
         1,
         2,
@@ -57,24 +27,24 @@
               "direction": "Horizontal",
               "ratio": 0.5,
               "first": {
-                "Pane": 3
+                "Pane": 1
               },
               "second": {
-                "Pane": 10
+                "Pane": 2
               }
             }
           },
           "panes": {
-            "3": {
+            "2": {
-              "cwd": "/home/liph/dotfiles/nvim/.config/nvim/lua"
+              "cwd": "/home/liph"
             },
-            "10": {
+            "1": {
-              "cwd": "/home/liph/dotfiles/nvim/.config/nvim/lua/plugins"
+              "cwd": "/mnt"
             }
           },
           "zoomed": false,
-          "focused": 10,
+          "focused": 2,
-          "root_pane": 3
+          "root_pane": 1
         },
         {
           "custom_name": "Music",
@@ -83,51 +53,52 @@
               "direction": "Horizontal",
               "ratio": 0.5,
               "first": {
-                "Pane": 4
+                "Pane": 3
               },
               "second": {
-                "Pane": 5
+                "Pane": 4
               }
             }
           },
           "panes": {
             "4": {
-              "cwd": "/home/liph"
+              "cwd": "/home/liph/dotfiles/aerc/.config/aerc"
             },
+            "3": {
+              "cwd": "/home/liph"
+            }
+          },
+          "zoomed": false,
+          "focused": 3,
+          "root_pane": 3
+        },
+        {
+          "custom_name": "Aerc",
+          "layout": {
+            "Pane": 5
+          },
+          "panes": {
             "5": {
               "cwd": "/home/liph"
             }
           },
           "zoomed": false,
-          "focused": 4,
+          "focused": 5,
-          "root_pane": 4
+          "root_pane": 5
-        },
-        {
-          "custom_name": "Aerc",
-          "layout": {
-            "Pane": 6
-          },
-          "panes": {
-            "6": {
-              "cwd": "/home/liph"
-            }
-          },
-          "zoomed": false,
-          "focused": 6,
-          "root_pane": 6
         }
       ],
       "active_tab": 0
     },
     {
-      "id": "w6",
+      "id": "w11",
       "custom_name": "Dotfiles",
       "identity_cwd": "/home/liph/dotfiles",
       "public_pane_numbers": {
-        "7": 1,
+        "10": 3,
-        "8": 2
+        "6": 1,
+        "7": 2
       },
-      "next_public_pane_number": 3,
+      "next_public_pane_number": 4,
       "public_tab_numbers": [
         1
       ],
@@ -140,25 +111,73 @@
               "direction": "Horizontal",
               "ratio": 0.7613636,
               "first": {
-                "Pane": 7
+                "Pane": 6
               },
               "second": {
-                "Pane": 8
+                "Split": {
+                  "direction": "Horizontal",
+                  "ratio": 0.5,
+                  "first": {
+                    "Pane": 7
+                  },
+                  "second": {
+                    "Pane": 10
+                  }
+                }
               }
             }
           },
           "panes": {
-            "8": {
+            "10": {
+              "cwd": "/home/liph/dotfiles",
+              "label": "Git",
+              "launch_argv": [
+                "bash",
+                "-c",
+                "exec bash \"$HERDR_PLUGIN_ROOT/scripts/run-lazygit.sh\""
+              ]
+            },
+            "7": {
               "cwd": "/home/liph/dotfiles",
               "label": "Git"
             },
-            "7": {
+            "6": {
               "cwd": "/home/liph/dotfiles"
             }
           },
           "zoomed": false,
-          "focused": 7,
+          "focused": 10,
-          "root_pane": 7
+          "root_pane": 6
+        }
+      ],
+      "active_tab": 0
+    },
+    {
+      "id": "w12",
+      "custom_name": "Coding",
+      "identity_cwd": "/home/liph",
+      "public_pane_numbers": {
+        "8": 1
+      },
+      "next_public_pane_number": 3,
+      "public_tab_numbers": [
+        1
+      ],
+      "next_public_tab_number": 2,
+      "tabs": [
+        {
+          "custom_name": "Pi",
+          "layout": {
+            "Pane": 8
+          },
+          "panes": {
+            "8": {
+              "cwd": "/home/liph"
+            }
+          },
+          "zoomed": false,
+          "focused": 8,
+          "root_pane": 8
         }
       ],
       "active_tab": 0

kanata/.config/systemd/user/default.target.wants/protonmail-bridge.service

@@ -0,0 +1 @@
+/usr/lib/systemd/user/protonmail-bridge.service

kanata/.config/systemd/user/graphical-session.target.wants/swayidle.service

@@ -0,0 +1 @@
+/home/liph/.config/systemd/user/swayidle.service

kanata/.config/systemd/user/mailsync-login.timer

@@ -0,0 +1 @@
+/home/liph/dotfiles/systemd/.config/systemd/user/mailsync-login.timer

kanata/.config/systemd/user/mailsync.service

@@ -0,0 +1 @@
+/home/liph/dotfiles/systemd/.config/systemd/user/mailsync.service

kanata/.config/systemd/user/mailsync.timer

@@ -0,0 +1 @@
+/home/liph/dotfiles/systemd/.config/systemd/user/mailsync.timer

kanata/.config/systemd/user/timers.target.wants/mailsync-login.timer

@@ -0,0 +1 @@
+/home/liph/.config/systemd/user/mailsync-login.timer

kanata/.config/systemd/user/timers.target.wants/mailsync.timer

@@ -0,0 +1 @@
+/home/liph/.config/systemd/user/mailsync.timer

niri/.config/niri/config.kdl

@@ -101,7 +101,7 @@ spawn-at-startup "wezterm"
 spawn-at-startup "obsidian"
 // spawn-at-startup "kanshi"
 spawn-at-startup "librewolf"
-spawn-at-startup "sh" "-c" "sleep 5 && exec swayidle -w timeout 300 hyprlock timeout 600 'niri msg action power-off-monitors' resume 'niri msg action power-on-monitors' timeout 3600 'systemctl suspend'"
+spawn-at-startup "swayidle" "-w" "timeout" "200" "hyprlock" "timeout" "600" "niri msg action power-off-monitors" "resume" "niri msg action power-on-monitors" "timeout" "3600" "systemctl suspend"
 
 prefer-no-csd
 gestures {
@@ -126,7 +126,12 @@ window-rule {
   match app-id="Zoom Workplace"
   open-floating true
 }
-// Wezterm window rules
+
+////////////////////////////////////
+////// Startup Window Rules ////////
+////////////////////////////////////
+
+// Wezterm
 window-rule {
     match at-startup=true app-id="wezterm"
     open-on-workspace "1"
@@ -134,39 +139,52 @@ window-rule {
     open-floating false
     // clip-to-geometry true
 }
+// Librewolf
 window-rule {
-    match at-startup=false app-id="wezterm"
+    match at-startup=true app-id="librewolf"
-    open-floating false
+    open-on-workspace "2"
-    // clip-to-geometry true
+    open-maximized true
 }
-// Obsidian window rules
+// Obsidian
 window-rule {
     match at-startup=true app-id="obsidian"
     open-on-workspace "3"
     open-maximized true
     open-floating false
 }
+
+////////////////////////////////////
+/////// Normal Window Rules ////////
+////////////////////////////////////
+
+// Wezterm
+window-rule {
+    match app-id="wezterm"
+    open-floating false
+    clip-to-geometry true
+    default-column-width {
+        proportion 0.5
+    }
+}
+// Steam
 window-rule {
     match app-id="steam_app_4197610"
     open-fullscreen true
 }
+// Obsidian
 window-rule {
     match at-startup=false app-id="obsidian"
     open-maximized true
     open-floating false
 }
-// Librewolf window rules
+// Librewolf
-window-rule {
-    match at-startup=true app-id="librewolf"
-    open-on-workspace "2"
-    open-maximized true
-}
 window-rule {
     match app-id="librewolf"
     open-maximized true
     clip-to-geometry true
     open-floating false
 }
+// Slack
 window-rule {
     match app-id="slack"
     open-maximized true
@@ -174,6 +192,7 @@ window-rule {
     open-on-workspace "4"
     open-floating false
 }
+// Tidal
 window-rule {
     match app-id="tidal-hifi"
     open-maximized true
@@ -181,6 +200,7 @@ window-rule {
     open-floating false
     open-on-workspace "4"
 }
+// Tor
 window-rule {
     match app-id="Tor Browser"
     open-maximized true
@@ -188,15 +208,14 @@ window-rule {
     open-floating false
     open-on-workspace "2"
 }
+// Claude
 window-rule {
     match app-id="Claude"
     open-on-workspace "4"
-    default-column-width {
+    open-maximized true
-        proportion 0.6667
-    }
     clip-to-geometry true
 }
-// 2. Specific rule for windows opening at startup
+// Betterbird
 window-rule {
     match app-id="eu.betterbird.Betterbird"
     open-maximized true
@@ -204,26 +223,11 @@ window-rule {
     open-on-workspace "3"
 }
 
-window-rule {
+////////////////////////////////////
-    match app-id="Slack"
+/////// Special Window Rules ///////
-    open-maximized true
+////////////////////////////////////
-    clip-to-geometry true
+
-    open-on-workspace "4"
+// Htop
-}
-window-rule {
-    match app-id="floating_btop"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_musikcube"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
 window-rule {
     match app-id="floating_htop"
     default-column-width {
@@ -231,6 +235,23 @@ window-rule {
     }
     open-floating true
 }
+// Btop
+window-rule {
+    match app-id="floating_btop"
+    default-column-width {
+        proportion 0.6667
+    }
+    open-floating true
+}
+// Musikcube
+window-rule {
+    match app-id="floating_musikcube"
+    default-column-width {
+        proportion 0.6667
+    }
+    open-floating true
+}
+// Bluetui
 window-rule {
     match app-id="floating_bluetui"
     default-column-width {
@@ -238,6 +259,7 @@ window-rule {
     }
     open-floating true
 }
+// Pulsemixer
 window-rule {
     match app-id="floating_pulsemixer"
     default-column-width {
@@ -245,6 +267,7 @@ window-rule {
     }
     open-floating true
 }
+// Wavemon
 window-rule {
     match app-id="floating_wavemon"
     default-column-width {
@@ -252,6 +275,7 @@ window-rule {
     }
     open-floating true
 }
+// network-tui
 window-rule {
     match app-id="floating_network-tui"
     default-column-width {
@@ -259,6 +283,7 @@ window-rule {
     }
     open-floating true
 }
+// Yazi
 window-rule {
     match app-id="floating_yazi"
     default-column-width {
@@ -266,12 +291,18 @@ window-rule {
     }
     open-floating true
 }
+
 window-rule {
     geometry-corner-radius 5
     clip-to-geometry true
 }
+
+////////////////////////////////////
+//////////// Keybinds///////////////
+////////////////////////////////////
+
 binds {
-    // Mod+Shift+Slash { show-hotkey-overlay; }
+
     Mod+Mod5+J {
         spawn "hyprlock"
     }

niri/.config/niri/config.kdl.bak

@@ -126,7 +126,12 @@ window-rule {
   match app-id="Zoom Workplace"
   open-floating true
 }
-// Wezterm window rules
+
+////////////////////////////////////
+////// Startup Window Rules ////////
+////////////////////////////////////
+
+// Wezterm
 window-rule {
     match at-startup=true app-id="wezterm"
     open-on-workspace "1"
@@ -134,39 +139,52 @@ window-rule {
     open-floating false
     // clip-to-geometry true
 }
+// Librewolf
 window-rule {
-    match at-startup=false app-id="wezterm"
+    match at-startup=true app-id="librewolf"
-    open-floating false
+    open-on-workspace "2"
-    // clip-to-geometry true
+    open-maximized true
 }
-// Obsidian window rules
+// Obsidian
 window-rule {
     match at-startup=true app-id="obsidian"
     open-on-workspace "3"
     open-maximized true
     open-floating false
 }
+
+////////////////////////////////////
+/////// Normal Window Rules ////////
+////////////////////////////////////
+
+// Wezterm
+window-rule {
+    match app-id="wezterm"
+    open-floating false
+    clip-to-geometry true
+    default-column-width {
+        proportion 0.5
+    }
+}
+// Steam
 window-rule {
     match app-id="steam_app_4197610"
     open-fullscreen true
 }
+// Obsidian
 window-rule {
     match at-startup=false app-id="obsidian"
     open-maximized true
     open-floating false
 }
-// Librewolf window rules
+// Librewolf
-window-rule {
-    match at-startup=true app-id="librewolf"
-    open-on-workspace "2"
-    open-maximized true
-}
 window-rule {
     match app-id="librewolf"
     open-maximized true
     clip-to-geometry true
     open-floating false
 }
+// Slack
 window-rule {
     match app-id="slack"
     open-maximized true
@@ -174,6 +192,7 @@ window-rule {
     open-on-workspace "4"
     open-floating false
 }
+// Tidal
 window-rule {
     match app-id="tidal-hifi"
     open-maximized true
@@ -181,6 +200,7 @@ window-rule {
     open-floating false
     open-on-workspace "4"
 }
+// Tor
 window-rule {
     match app-id="Tor Browser"
     open-maximized true
@@ -188,15 +208,14 @@ window-rule {
     open-floating false
     open-on-workspace "2"
 }
+// Claude
 window-rule {
     match app-id="Claude"
     open-on-workspace "4"
-    default-column-width {
+    open-maximized true
-        proportion 0.6667
-    }
     clip-to-geometry true
 }
-// 2. Specific rule for windows opening at startup
+// Betterbird
 window-rule {
     match app-id="eu.betterbird.Betterbird"
     open-maximized true
@@ -204,26 +223,11 @@ window-rule {
     open-on-workspace "3"
 }
 
-window-rule {
+////////////////////////////////////
-    match app-id="Slack"
+/////// Special Window Rules ///////
-    open-maximized true
+////////////////////////////////////
-    clip-to-geometry true
+
-    open-on-workspace "4"
+// Htop
-}
-window-rule {
-    match app-id="floating_btop"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_musikcube"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
 window-rule {
     match app-id="floating_htop"
     default-column-width {
@@ -231,6 +235,23 @@ window-rule {
     }
     open-floating true
 }
+// Btop
+window-rule {
+    match app-id="floating_btop"
+    default-column-width {
+        proportion 0.6667
+    }
+    open-floating true
+}
+// Musikcube
+window-rule {
+    match app-id="floating_musikcube"
+    default-column-width {
+        proportion 0.6667
+    }
+    open-floating true
+}
+// Bluetui
 window-rule {
     match app-id="floating_bluetui"
     default-column-width {
@@ -238,6 +259,7 @@ window-rule {
     }
     open-floating true
 }
+// Pulsemixer
 window-rule {
     match app-id="floating_pulsemixer"
     default-column-width {
@@ -245,6 +267,7 @@ window-rule {
     }
     open-floating true
 }
+// Wavemon
 window-rule {
     match app-id="floating_wavemon"
     default-column-width {
@@ -252,6 +275,7 @@ window-rule {
     }
     open-floating true
 }
+// network-tui
 window-rule {
     match app-id="floating_network-tui"
     default-column-width {
@@ -259,6 +283,7 @@ window-rule {
     }
     open-floating true
 }
+// Yazi
 window-rule {
     match app-id="floating_yazi"
     default-column-width {
@@ -266,12 +291,18 @@ window-rule {
     }
     open-floating true
 }
+
 window-rule {
     geometry-corner-radius 5
     clip-to-geometry true
 }
+
+////////////////////////////////////
+//////////// Keybinds///////////////
+////////////////////////////////////
+
 binds {
-    // Mod+Shift+Slash { show-hotkey-overlay; }
+
     Mod+Mod5+J {
         spawn "hyprlock"
     }
@@ -296,8 +327,8 @@ binds {
     Mod+Alt+Return hotkey-overlay-title="Open Kitty" {
         spawn "wezterm"
     }
-    Mod+Alt+Space hotkey-overlay-title="Open Wofi" {
+    Mod+Alt+Space hotkey-overlay-title="Open Launcher" {
-        spawn "wofi" "--show" "drun"
+        spawn "qs" "ipc" "call" "launcher" "toggle"
     }
     Mod+Mod5+Q hotkey-overlay-title="Open Htop" {
         spawn "wezterm" "start" "--class" "floating_htop" "-e" "htop"

niri/.config/niri/config.kdl.bak2

@@ -1,655 +0,0 @@
-// This config is in the KDL format: https://kdl.dev
-// "/-" comments out the following node.
-// Check the wiki for a full description of the configuration:
-// https://yalter.github.io/niri/Configuration:-Introduction
-input {
-    keyboard {
-
-        xkb {
-            layout "ch"
-            variant "de_mac"
-            model "apple"
-        }
-    }
-    touchpad {
-        tap
-        natural-scroll
-   }
-    mouse {
-
-    }
-    trackpoint {
-
-    }
-}
-// x11 support for wayland
-xwayland-satellite {
-    path "xwayland-satellite"
-}
-environment {
-    ELECTRON_OZONE_PLATFORM_HINT "auto"
-    ELECTRON_ENABLE_LOGGING "1"
- // GDK_SCALE "1.75"
-    // GDK_DPI_SCALE "1"
-}
-output "eDP-1" {
-    mode "2880x1800@59.990"
-    scale 1.1
-    position x=0 y=0
-    focus-at-startup
-}
-output "eDP-2" {
-    mode "2880x1800@59.990"
-    scale 1.1
-    position x=0 y=0
-    focus-at-startup
-}
-output "eDP-3" {
-    mode "2880x1800@59.990"
-    scale 1.1
-    position x=0 y=0
-    focus-at-startup
-}
-output "DP-4" {
-    mode "2560x1440@59.951"
-    position x=1645 y=0
-    scale 1.1
-}
-layout {
-    gaps 2
-    center-focused-column "never"
-    preset-column-widths {
-        proportion 0.5
-        proportion 0.66667
-        proportion 0.3333
-    }
-    default-column-width {
-        proportion 0.5
-    }
-    focus-ring {
-        width 2
-        active-color "#7daea3"
-        inactive-color "#928374"
-    }
-    border {
-        off
-        width 4
-        active-color "#eba0ac"
-        inactive-color "#505050"
-        urgent-color "#9b0000"
-    }
-    shadow {
-        softness 30
-        spread 5
-        offset x=0 y=5
-        color "#0007"
-    }
-    struts {
-
-    }
-}
-
-spawn-at-startup "bash" "/mnt/tank/scripts/fix-bitwarden.sh"
-// spawn-at-startup "waybar" "-c" "/home/liph/.config/niri/waybar-niri/config.jsonc" "-s" "/home/liph/.config/niri/waybar-niri/style.css"
-spawn-at-startup "swaync"
-spawn-at-startup "quickshell"
-// spawn-at-startup "kanshi"
-spawn-at-startup "awww-daemon"
-spawn-at-startup "xwayland-satellite"
-spawn-at-startup "gammastep" "-l" "47.38:8.54" "-t" "6000:4000"
-spawn-at-startup "wezterm"
-spawn-at-startup "obsidian"
-// spawn-at-startup "kanshi"
-spawn-at-startup "librewolf"
-spawn-at-startup "sh" "-c" "sleep 5 && exec swayidle -w timeout 300 hyprlock timeout 600 'niri msg action power-off-monitors' resume 'niri msg action power-on-monitors' timeout 3600 'systemctl suspend'"
-
-prefer-no-csd
-gestures {
-    hot-corners {
-        off
-    }
-}
-
-workspace "1"
-workspace "2"
-workspace "3"
-workspace "4"
-
-// Example: block out two password managers from screen capture.
-// (This example rule is commented out with a "/-" in front.)
-/-window-rule {
-match app-id=r#"^org\.keepassxc\.KeePassXC$"#
-match app-id=r#"^org\.gnome\.World\.Secrets$"#
-block-out-from "screen-capture"
-}
-window-rule {
-  match app-id="Zoom Workplace"
-  open-floating true
-}
-// Wezterm window rules
-window-rule {
-    match at-startup=true app-id="wezterm"
-    open-on-workspace "1"
-    open-maximized true
-    open-floating false
-    // clip-to-geometry true
-}
-window-rule {
-    match at-startup=false app-id="wezterm"
-    open-floating false
-    // clip-to-geometry true
-}
-// Obsidian window rules
-window-rule {
-    match at-startup=true app-id="obsidian"
-    open-on-workspace "3"
-    open-maximized true
-    open-floating false
-}
-window-rule {
-    match app-id="steam_app_4197610"
-    open-fullscreen true
-}
-window-rule {
-    match at-startup=false app-id="obsidian"
-    open-maximized true
-    open-floating false
-}
-// Librewolf window rules
-window-rule {
-    match at-startup=true app-id="librewolf"
-    open-on-workspace "2"
-    open-maximized true
-}
-window-rule {
-    match app-id="librewolf"
-    open-maximized true
-    clip-to-geometry true
-    open-floating false
-}
-window-rule {
-    match app-id="slack"
-    open-maximized true
-    clip-to-geometry true
-    open-on-workspace "4"
-    open-floating false
-}
-window-rule {
-    match app-id="tidal-hifi"
-    open-maximized true
-    clip-to-geometry true
-    open-floating false
-    open-on-workspace "4"
-}
-window-rule {
-    match app-id="Tor Browser"
-    open-maximized true
-    clip-to-geometry true
-    open-floating false
-    open-on-workspace "2"
-}
-window-rule {
-    match app-id="Claude"
-    open-on-workspace "4"
-    default-column-width {
-        proportion 0.6667
-    }
-    clip-to-geometry true
-}
-// 2. Specific rule for windows opening at startup
-window-rule {
-    match app-id="eu.betterbird.Betterbird"
-    open-maximized true
-    clip-to-geometry true
-    open-on-workspace "3"
-}
-
-window-rule {
-    match app-id="Slack"
-    open-maximized true
-    clip-to-geometry true
-    open-on-workspace "4"
-}
-window-rule {
-    match app-id="floating_btop"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_musikcube"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_htop"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_bluetui"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_pulsemixer"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_wavemon"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_network-tui"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    match app-id="floating_yazi"
-    default-column-width {
-        proportion 0.6667
-    }
-    open-floating true
-}
-window-rule {
-    geometry-corner-radius 5
-    clip-to-geometry true
-}
-binds {
-    // Mod+Shift+Slash { show-hotkey-overlay; }
-    Mod+Mod5+J {
-        spawn "hyprlock"
-    }
-    Mod+Alt+P hotkey-overlay-title="Open Bitwarden" {
-        spawn "bitwarden-desktop"
-    }
-    Mod+Alt+T hotkey-overlay-title="Open Tipp10" {
-        spawn "tipp10"
-    }
-    Mod+Alt+S hotkey-overlay-title="Open Tidal" {
-        spawn "tidal-hifi" "--ozone-platform=wayland" "--enable-features=WaylandWindowDecorations"
-    }
-    Mod+Alt+O hotkey-overlay-title="Open Obsidian" {
-        spawn "obsidian"
-    }
-    Mod+Alt+C hotkey-overlay-title="Open Claude" {
-        spawn "claude-desktop"
-    }
-    Mod+Alt+Z hotkey-overlay-title="Open Librewolf" {
-        spawn "librewolf"
-    }
-    Mod+Alt+Return hotkey-overlay-title="Open Kitty" {
-        spawn "wezterm"
-    }
-    Mod+Alt+Space hotkey-overlay-title="Open Wofi" {
-        spawn "wofi" "--show" "drun"
-    }
-    Mod+Mod5+Q hotkey-overlay-title="Open Htop" {
-        spawn "wezterm" "start" "--class" "floating_htop" "-e" "htop"
-    }
-    Mod+Mod5+W hotkey-overlay-title="Open Btop" {
-        spawn "wezterm" "start" "--class" "floating_btop" "-e" "btop"
-    }    
-    Mod+Mod5+E hotkey-overlay-title="Open Pulsemixer" {
-        spawn "wezterm" "start" "--class" "floating_pulsemixer" "-e" "pulsemixer"
-    }
-    Mod+Mod5+R allow-inhibiting=false hotkey-overlay-title="Open Bluetui"  {
-        spawn "wezterm" "start" "--class" "floating_bluetui" "-e" "bluetui"
-    }
-    Mod+Mod5+T hotkey-overlay-title="Open Wavemon" {
-        spawn "wezterm" "start" "--class" "floating_wavemon" "-e" "wavemon"
-    }
-    Mod+Mod5+Z hotkey-overlay-title="Open network-tui" {
-        spawn "wezterm" "start" "--class" "floating_network-tui" "-e" "network-tui"
-    }
-    Mod+Mod5+U hotkey-overlay-title="Open Musikcube" {
-        spawn "wezterm" "start" "--class" "floating_musikcube" "-e" "musikcube"
-    }
-    Mod+Mod5+Y hotkey-overlay-title="Open Yazi" {
-        spawn "wezterm" "start" "--class" "floating_yazi" "-e" "yazi"
-    }
-    // Brightness Controll
-    Mod+Ctrl+0 {
-        spawn "sh" "-c" "~/scripts/layer_notify.sh 0"
-    }
-    Mod+Ctrl+1 {
-        spawn "sh" "-c" "~/scripts/layer_notify.sh 1"
-    }
-    Mod+Ctrl+2 {
-        spawn "sh" "-c" "~/scripts/layer_notify.sh 2"
-    }
-    Mod+Ctrl+3 {
-        spawn "sh" "-c" "~/scripts/layer_notify.sh 3"
-    }
-    // Brightness controls
-    Mod+Ctrl+4 {
-        spawn "sh" "-c" "~/scripts/niri_br_up.sh"
-    }
-    Mod+Ctrl+5 {
-        spawn "sh" "-c" "~/scripts/niri_br_down.sh"
-    }
-    Mod+Ctrl+6 {
-        spawn "sh" "-c" "~/scripts/niri_br_blue.sh"
-    }
-    Mod+Ctrl+7 {
-        spawn "sh" "-c" "~/scripts/niri_br_reset.sh"
-    }
-    // Swaync Notifications
-    Mod+Ctrl+8 {
-        spawn "swaync-client" "-t"
-    }
-    Super+Alt+S allow-when-locked=true hotkey-overlay-title=null {
-        spawn-sh "pkill orca || exec orca"
-    }
-    XF86AudioRaiseVolume allow-when-locked=true {
-        spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"
-    }
-    XF86AudioLowerVolume allow-when-locked=true {
-        spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"
-    }
-    XF86AudioMute allow-when-locked=true {
-        spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"
-    }
-    XF86AudioMicMute allow-when-locked=true {
-        spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"
-    }
-    XF86AudioPlay allow-when-locked=true {
-        spawn-sh "playerctl play-pause"
-    }
-    XF86AudioStop allow-when-locked=true {
-        spawn-sh "playerctl stop"
-    }
-    XF86AudioPrev allow-when-locked=true {
-        spawn-sh "playerctl previous"
-    }
-    XF86AudioNext allow-when-locked=true {
-        spawn-sh "playerctl next"
-    }
-    XF86MonBrightnessUp allow-when-locked=true {
-        spawn "brightnessctl" "--class=backlight" "set" "+10%"
-    }
-    XF86MonBrightnessDown allow-when-locked=true {
-        spawn "brightnessctl" "--class=backlight" "set" "10%-"
-    }
-    Mod+O repeat=false {
-        toggle-overview
-    }
-    Mod+Shift+C repeat=false {
-        close-window
-    }
-    Mod+Left {
-        focus-column-left
-    }
-    Mod+Down {
-        focus-window-down
-    }
-    Mod+Up {
-        focus-window-up
-    }
-    Mod+Right {
-        focus-column-right
-    }
-    Mod+H {
-        focus-column-left
-    }
-    Mod+J {
-        focus-window-down
-    }
-    Mod+K {
-        focus-window-up
-    }
-    Mod+L {
-        focus-column-right
-    }
-    Mod+Ctrl+Left {
-        move-column-left
-    }
-    Mod+Ctrl+Down {
-        move-window-down
-    }
-    Mod+Ctrl+Up {
-        move-window-up
-    }
-    Mod+Ctrl+Right {
-        move-column-right
-    }
-    Mod+Ctrl+H {
-        move-column-left
-    }
-    Mod+Ctrl+J {
-        move-window-down
-    }
-    Mod+Ctrl+K {
-        move-window-up
-    }
-    Mod+Ctrl+L {
-        move-column-right
-    }
-    // Mod+Shift+Down  { focus-monitor-down; }
-    // Mod+Shift+Up    { focus-monitor-up; }
-    // Mod+Shift+Right { focus-monitor-right; }
-    Mod+Shift+H {
-        focus-monitor-left
-    }
-    // Mod+Shift+J     { focus-monitor-down; }
-    // Mod+Shift+K     { focus-monitor-up; }
-    Mod+Shift+L {
-        focus-monitor-right
-    }
-    Mod+Shift+Ctrl+Left {
-        move-column-to-monitor-left
-    }
-    // Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
-    // Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
-    Mod+Shift+Ctrl+Right {
-        move-column-to-monitor-right
-    }
-    Mod+Shift+Ctrl+H {
-        move-column-to-monitor-left
-    }
-    // Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
-    // Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
-    Mod+Shift+Ctrl+L {
-        move-column-to-monitor-right
-    }
-    Mod+U {
-        focus-workspace-down
-    }
-    Mod+I {
-        focus-workspace-up
-    }
-    Mod+Alt+J {
-        move-column-to-workspace-down
-    }
-    Mod+Alt+K {
-        move-column-to-workspace-up
-    }
-    Mod+Alt+U {
-        move-column-to-workspace-down
-    }
-    Mod+Alt+I {
-        move-column-to-workspace-up
-    }
-    Mod+Shift+U {
-        move-workspace-down
-    }
-    Mod+Shift+I {
-        move-workspace-up
-    }
-    Mod+WheelScrollDown cooldown-ms=150 {
-        focus-workspace-down
-    }
-    Mod+WheelScrollUp cooldown-ms=150 {
-        focus-workspace-up
-    }
-    Mod+Ctrl+WheelScrollDown cooldown-ms=150 {
-        move-column-to-workspace-down
-    }
-    Mod+Ctrl+WheelScrollUp cooldown-ms=150 {
-        move-column-to-workspace-up
-    }
-    Mod+WheelScrollRight {
-        focus-column-right
-    }
-    Mod+WheelScrollLeft {
-        focus-column-left
-    }
-    Mod+Ctrl+WheelScrollRight {
-        move-column-right
-    }
-    Mod+Ctrl+WheelScrollLeft {
-        move-column-left
-    }
-    Mod+Shift+WheelScrollDown {
-        focus-column-right
-    }
-    Mod+Shift+WheelScrollUp {
-        focus-column-left
-    }
-    Mod+Ctrl+Shift+WheelScrollDown {
-        move-column-right
-    }
-    Mod+Ctrl+Shift+WheelScrollUp {
-        move-column-left
-    }
-    Mod+1 {
-        focus-workspace 1
-    }
-    Mod+2 {
-        focus-workspace 2
-    }
-    Mod+3 {
-        focus-workspace 3
-    }
-    Mod+4 {
-        focus-workspace 4
-    }
-    Mod+5 {
-        focus-workspace 5
-    }
-    Mod+6 {
-        focus-workspace 6
-    }
-    Mod+7 {
-        focus-workspace 7
-    }
-    Mod+8 {
-        focus-workspace 8
-    }
-    Mod+9 {
-        focus-workspace 9
-    }
-    // Mod+Ctrl+1 { move-column-to-workspace 1; }
-    // Mod+Ctrl+2 { move-column-to-workspace 2; }
-    // Mod+Ctrl+3 { move-column-to-workspace 3; }
-    // Mod+Ctrl+4 { move-column-to-workspace 4; }
-    // Mod+Ctrl+5 { move-column-to-workspace 5; }
-    // Mod+Ctrl+6 { move-column-to-workspace 6; }
-    // Mod+Ctrl+7 { move-column-to-workspace 7; }
-    // Mod+Ctrl+8 { move-column-to-workspace 8; }
-    // Mod+Ctrl+9 { move-column-to-workspace 9; }
-    Mod+BracketLeft {
-        consume-or-expel-window-left
-    }
-    Mod+BracketRight {
-        consume-or-expel-window-right
-    }
-    Mod+Comma {
-        consume-window-into-column
-    }
-    Mod+Period {
-        expel-window-from-column
-    }
-    Mod+R {
-        switch-preset-column-width
-    }
-    // Cycling through the presets in reverse order is also possible.
-    // Mod+R { switch-preset-column-width-back; }
-    // Mod+Shift+R {
-    //     switch-preset-window-height
-    // }
-    // Mod+Ctrl+R {
-    //     reset-window-height
-    // }
-    Mod+F {
-        maximize-column
-    }
-    Mod+Shift+F {
-        fullscreen-window
-    }
-    Mod+Ctrl+F {
-        expand-column-to-available-width
-    }
-    // Mod+C { center-column; }
-    Mod+Ctrl+C {
-        center-visible-columns
-    }
-    Mod+Minus {
-        set-column-width "-10%"
-    }
-    Mod+Equal {
-        set-column-width "+10%"
-    }
-    // Finer height adjustments when in column with other windows.
-    Mod+Shift+Minus {
-        set-window-height "-10%"
-    }
-    Mod+Shift+Equal {
-        set-window-height "+10%"
-    }
-    // Move the focused window between the floating and the tiling layout.
-    Mod+V {
-        toggle-window-floating
-    }
-    Mod+Shift+V {
-        switch-focus-between-floating-and-tiling
-    }
-    Mod+W {
-        toggle-column-tabbed-display
-    }
-    // screenshot
-    Mod+Alt+4 {
-        spawn "sh" "-c" "grim -g \"$(slurp)\" ~/Pictures/screenshot-$(date +%Y%m%d-%H%M%S).png && notify-send 'Screenshot' 'Area screenshot saved'"
-    }
-    // Fullscreen and save
-    Mod+Alt+5 {
-        spawn "sh" "-c" "grim ~/Pictures/screenshot-$(date +%Y%m%d-%H%M%S).png && notify-send -t 2000 'Screenshot' 'Fullscreen screenshot saved'"
-    }
-    // Select area to clipboard
-    Mod+Shift+4 {
-        spawn "sh" "-c" "grim -g \"$(slurp)\" - | wl-copy && notify-send -t 2000 'Screenshot' 'Area copied to clipboard'"
-    }
-    // area screenshot → annotate in swappy
-    Mod+Shift+5 {
-    spawn "sh" "-c" "grim -g \"$(slurp)\" - | swappy -f -"
-    }
-    Mod+Escape allow-inhibiting=false {
-        toggle-keyboard-shortcuts-inhibit
-    }
-    Mod+Shift+E {
-        quit
-    }
-    Ctrl+Alt+Delete {
-        quit
-    }
-    Mod+Shift+P {
-        power-off-monitors
-    }
-}
- // include "theme.kdl"
-

nvim/.config/nvim/after/ftplugin/mail.lua

@@ -140,3 +140,78 @@ end
 -- Keybinds
 vim.keymap.set("i", "<C-f>", pick_email, { buffer = true, desc = "Pick email from abook" })
 vim.keymap.set("n", "<C-f>", pick_email, { buffer = true, desc = "Pick email from abook" })
+
+-- Jump to the Subject line when a fresh (non-reply) compose opens
+local function is_reply_buffer(buf)
+  local lines = vim.api.nvim_buf_get_lines(buf, 0, 40, false)
+  for _, l in ipairs(lines) do
+    if l:match("^On .+ wrote:") or l:match("^%s*>") or l:match("^In%-Reply%-To:") then
+      return true
+    end
+  end
+  return false
+end
+
+if not is_reply_buffer(0) then
+  local buf = 0
+  for i, l in ipairs(vim.api.nvim_buf_get_lines(buf, 0, 30, false)) do
+    if l:match("^%s*[Ss]ubject:") then
+      vim.api.nvim_win_set_cursor(0, { i, #l })
+      vim.schedule(function()
+        if vim.bo.filetype == "mail" or vim.bo[buf].filetype == "mail" then
+          vim.cmd("startinsert!")
+        end
+      end)
+      break
+    end
+  end
+end
+
+-- Attach files to the aerc draft via yazi (terminal split + aerc IPC)
+-- Normal mode: `,a` · Insert mode: <Alt+a> · aerc-side fallback: <F4>
+local function yazi_attach()
+  local chooser = vim.fn.tempname()
+  vim.cmd('belowright 15split')
+  local tbuf = vim.api.nvim_get_current_buf()
+  vim.fn.jobstart(
+    { 'yazi', '--chooser-file=' .. chooser, vim.fn.expand('~/Downloads') },
+    { term = true }
+  )
+  vim.cmd('startinsert')
+  vim.api.nvim_create_autocmd('TermClose', {
+    buffer = tbuf,
+    once = true,
+    callback = function()
+      vim.schedule(function()
+        local win = vim.fn.bufwinid(tbuf)
+        if win ~= -1 then pcall(vim.api.nvim_win_close, win, true) end
+        local f = io.open(chooser, 'r')
+        if not f then return end
+        local content = f:read('*a')
+        f:close()
+        os.remove(chooser)
+        local n = 0
+        for p in content:gmatch('[^\r\n]+') do
+          local path = p:gsub('%s+$', '')
+          if path ~= '' then
+            vim.fn.system({ 'aerc', ':attach', path })
+            n = n + 1
+          end
+        end
+        if n > 0 then
+          vim.notify(('Attached %d file(s) to the draft'):format(n), vim.log.levels.INFO)
+        else
+          vim.notify('yazi: nothing selected', vim.log.levels.WARN)
+        end
+      end)
+    end,
+  })
+end
+
+vim.keymap.set('n', ',a', yazi_attach, { buffer = true, desc = 'Attach files via yazi' })
+vim.keymap.set('i', '<M-a>', yazi_attach, { buffer = true, desc = 'Attach files via yazi' })
+
+-- Spell-check while writing emails
+vim.opt_local.spell = true
+vim.opt_local.spelllang = 'en_us'
+vim.opt_local.complete:append('kspell')

nvim/.config/nvim/init.lua

@@ -1,3 +1,22 @@
+-- lates ledger
+-- LedgerSMB template preview: build current file's <base>.build.* directly
+local function lsmb_base()
+  local b = vim.fn.expand("%:t:r") -- name without final extension
+  b = b:gsub("%.build$", ""):gsub("%.stripped$", "") -- work even from generated files
+  return b
+end
+
+-- <leader>lb  -> regenerate + compile via latexmk (uses .latexmkrc hook)
+vim.keymap.set("n", "<leader>lb", function()
+  vim.cmd("!cd %:p:h && latexmk " .. lsmb_base() .. ".build.tex")
+end, { desc = "LedgerSMB: build preview" })
+
+-- <leader>lv  -> open the PDF in zathura, non-blocking
+vim.keymap.set("n", "<leader>lv", function()
+  local dir = vim.fn.expand("%:p:h")
+  vim.fn.jobstart({ "zathura", dir .. "/" .. lsmb_base() .. ".build.pdf" }, { detach = true })
+end, { desc = "LedgerSMB: view preview" })
+
 vim.opt.clipboard = "unnamedplus"
 -- In your init.lua or after lazy setup
 vim.opt.termguicolors = true

scripts/scripts/aerc-md-convert

@@ -0,0 +1,9 @@
+#!/bin/sh
+# aerc-md-convert — multipart-converter for aerc ([multipart-converters] text/html)
+# Reads the draft (markdown) on stdin, writes the HTML part to stdout.
+# Minimal clean HTML: no pandoc boilerplate, small readable CSS inline.
+{
+  printf '%s\n' '<html><head><meta charset="utf-8"><style>body{font-family:sans-serif;font-size:14px;line-height:1.5;max-width:60em}pre,code{font-family:monospace;font-size:13px;background:#f4f4f4;padding:1px 4px;border-radius:3px}pre{padding:8px;overflow-x:auto}img{max-width:100%}blockquote{border-left:3px solid #ccc;margin-left:0;padding-left:1em;color:#555}table{border-collapse:collapse}td,th{border:1px solid #ccc;padding:4px 8px}</style></head><body>'
+  pandoc -f markdown -t html5
+  printf '%s\n' '</body></html>'
+}

scripts/scripts/mail-compose

@@ -0,0 +1,113 @@
+#!/bin/bash
+# mail-compose — :menu picker for aerc's :compose (runs INSIDE aerc's popover)
+# Bound to `M`:  M = :menu -t Compose -c 'mail-compose' :compose<Enter>
+#
+# Flow (each step labelled, each skippable with Esc):
+#   [1/5] account   → switches the account tab via IPC (:change-tab)
+#   [2/5] from/alias (identities parsed from accounts.conf)
+#   [3/5] To        (fzf --multi over abook)
+#   [4/5] Cc
+#   [5/5] Bcc
+# aerc appends our stdout to `:compose` (xargs-style, quotes preserved):
+#   :compose -H "From: ..." -H "To: ..." -H "Cc: ..." -H "Bcc: ..."
+# Nothing picked → bare :compose (empty message).
+
+set -u
+
+AERC_ACCOUNTS="$HOME/.config/aerc/accounts.conf"
+DRY_RUN=0
+[ "${1:-}" = "--dry-run" ] && DRY_RUN=1
+
+# ---------- accounts & identities from accounts.conf ----------
+mapfile -t ACCOUNTS < <(awk '/^\[/{print substr($0,2,index($0,"]")-2)}' "$AERC_ACCOUNTS")
+
+_acct_field() { # $1=account $2=field-regex → value after '='
+    awk -v a="$1" -v f="$2" '/^\[/{sec=substr($0,2,index($0,"]")-2); next}
+        sec==a && $0 ~ "^" f "[ \\t]*=" {print; exit}' "$AERC_ACCOUNTS"
+}
+
+# print "Name <email>" identity lines for one account (default From first, then aliases)
+identities() {
+    local acct="$1" from_line name from_addr
+    from_line=$(_acct_field "$acct" 'from')
+    name=$(printf '%s\n' "$from_line" | sed 's/^[^=]*=[ \t]*//' | sed 's/<.*//' | sed 's/^[ \t"]*//; s/[ \t"]*$//')
+    {
+        printf '%s\n' "$from_line" | sed 's/^[^=]*=[ \t]*//' | sed 's/.*<//; s/>.*//'
+        _acct_field "$acct" 'aliases' | sed 's/^[^=]*=[ \t]*//' | tr ',' '\n'
+    } | sed 's/^[ \t]*//; s/[ \t]*$//' | awk -v n="$name" 'NF && !seen[$0]++ {
+        if ($0 ~ /</) print
+        else if (n != "") print n " <" $0 ">"
+        else print
+    }'
+}
+
+# ---------- contacts from abook ----------
+CONTACTS=$(abook --mutt-query "" 2>/dev/null | awk -F'\t' '
+    {
+        email = $1; name = $2
+        if (email == "") next
+        gsub(/^[ \t]+|[ \t]+$/, "", email); gsub(/^[ \t]+|[ \t]+$/, "", name)
+        if (name == "" || name == email || name ~ /[(),<>"]/) printf "%s\n", email
+        else printf "%s <%s>\n", name, email
+    }')
+
+# ---------- fzf helpers (clear step labelling) ----------
+pick_single() { # $1=prompt $2=header ; input on stdin; echoes selection or empty on Esc
+    fzf --reverse --info=inline --height=100% --prompt="$1" --header="$2" 2>/dev/null || true
+}
+pick_multi() { # $1=prompt $2=header ; input on stdin; echoes comma-joined selection
+    local sel
+    sel=$(fzf --multi --reverse --info=inline --height=100% --prompt="$1" --header="$2" \
+        --bind 'ctrl-space:toggle,ctrl-a:toggle-all' 2>/dev/null) || true
+    [ -z "$sel" ] && return 0
+    printf '%s' "$sel" | awk '{ printf "%s%s", (NR > 1 ? ", " : ""), $0 }'
+}
+
+if [ -z "$CONTACTS" ]; then
+    echo '-H "To: (no contacts — run mailsync first)"'
+    exit 0
+fi
+
+# ---------- 1/5: account ----------
+account="$(printf '%s\n' "${ACCOUNTS[@]}" \
+    | pick_single 'account> ' '▸ 1/5 · SEND FROM ACCOUNT · Enter=select · Esc=keep current')"
+
+# switch the account tab so :compose uses the right outgoing transport
+if [ -n "$account" ] && [ "$DRY_RUN" = "0" ]; then
+    aerc ":change-tab $account" >/dev/null 2>&1
+    sleep 0.2
+fi
+
+# ---------- 2/5: from/alias ----------
+from=""
+if [ -n "$account" ]; then
+    from="$(identities "$account" \
+        | pick_single 'from/alias> ' "▸ 2/5 · FROM — $account · Enter=select · Esc=account default")"
+fi
+
+# ---------- 3/5: To ----------
+to="$(printf '%s\n' "$CONTACTS" \
+    | pick_multi 'to> ' '▸ 3/5 · TO · type to filter · Tab/Ctrl+Space=mark · Enter=done · Esc=skip')"
+
+# ---------- 4/5: Cc ----------
+cc=""
+if [ -n "$to" ]; then
+    cc="$(printf '%s\n' "$CONTACTS" \
+        | pick_multi 'cc> ' '▸ 4/5 · CC · type to filter · Tab/Ctrl+Space=mark · Enter=done · Esc=skip')"
+fi
+
+# ---------- 5/5: Bcc ----------
+bcc=""
+if [ -n "$to" ]; then
+    bcc="$(printf '%s\n' "$CONTACTS" \
+        | pick_multi 'bcc> ' '▸ 5/5 · BCC · type to filter · Tab/Ctrl+Space=mark · Enter=done · Esc=skip')"
+fi
+
+# ---------- output: ONE line — :menu appends it to :compose as ONE command ----------
+# (each stdout line = one separate command execution, so -H needs its value on the same line)
+out=""
+[ -n "$from" ] && out="$out -H \"From: $from\""
+[ -n "$to" ]   && out="$out -H \"To: $to\""
+[ -n "$cc" ]   && out="$out -H \"Cc: $cc\""
+[ -n "$bcc" ]  && out="$out -H \"Bcc: $bcc\""
+printf '%s' "$out"

scripts/scripts/mailsync

@@ -0,0 +1,192 @@
+#!/bin/bash
+# mailsync — full mail update pipeline for aerc
+#   1. mbsync: pull all mail (config: ~/.config/isync/mksyncrc)
+#   2. notmuch new: index every account's database
+#   3. abook: rebuild contacts from every unique sender (phil + proton)
+# Triggered by: aerc keybind `u`, systemd user timers (08:00/12:00/17:00 + login+2min)
+
+set -u
+
+# ---------- configuration ----------
+SYNC_CONF="$HOME/.config/isync/mksyncrc"
+NM_CONF_DIR="$HOME/.config/notmuch"
+ABOOK_RC="$HOME/.config/abook/abookrc"
+ABOOK_DB="$HOME/.local/share/abook/addressbook"
+LOG_DIR="$HOME/.local/share/aerc/logs"
+LOG="$LOG_DIR/mailsync.log"
+LOCK="$HOME/.local/share/aerc/mailsync.lock"
+LOG_KEEP=7
+
+CHANNELS="liphlink-phil liphlink-spam proton"   # mbsync channels
+INDEX_ACCOUNTS="phil proton spam"               # notmuch databases to index
+CONTACT_ACCOUNTS="phil proton"                  # accounts harvested for abook
+
+HARVEST_EXCLUDE='and not folder:Junk and not folder:Spam and not folder:Trash and not tag:deleted'
+PHIL_QUERY="(folder:Inbox or folder:INBOX or folder:Sent or folder:Archive or folder:Personal or folder:Priority1 or folder:Priority2 or folder:Work) $HARVEST_EXCLUDE"
+PROTON_QUERY="(folder:INBOX or folder:Sent or folder:Archive or folder:Starred) and not folder:Spam and not folder:Trash and not tag:deleted"
+
+# own addresses are never added as contacts
+# own addresses are never added as contacts; MAILER-DAEMON bounces are noise
+OWN_ADDRESSES='phil@liphlink.xyz|pw@liphlink.xyz|p\.waibel@liphlink.xyz|philipp\.waibel@liphlink.xyz|spam@liphlink.xyz|blue@liphlink.xyz|red@liphlink.xyz|liiph@protonmail.com|liiph@proton.me|liiph@pm.me|ph\.waibel@proton.me|ph\.waibel@pm.me|liph@liphlink.xyz|mailer-daemon@'
+# -----------------------------------
+
+exec 9>"$LOCK"
+if ! flock -n 9; then
+    echo "mailsync: already running, skipping."
+    exit 0
+fi
+
+mkdir -p "$LOG_DIR" "$(dirname "$ABOOK_RC")" "$(dirname "$ABOOK_DB")"
+
+# ---------- log rotation (keep last $LOG_KEEP previous runs) ----------
+rm -f "$LOG_DIR/mailsync.log.$LOG_KEEP"
+i=$((LOG_KEEP - 1))
+while [ "$i" -ge 1 ]; do
+    [ -f "$LOG_DIR/mailsync.log.$i" ] && mv "$LOG_DIR/mailsync.log.$i" "$LOG_DIR/mailsync.log.$((i + 1))"
+    i=$((i - 1))
+done
+[ -f "$LOG" ] && mv "$LOG" "$LOG_DIR/mailsync.log.1"
+
+exec > >(tee "$LOG") 2>&1
+echo "=== mailsync started: $(date '+%Y-%m-%d %H:%M:%S') ==="
+
+# ---------- 1. mbsync: pull mail ----------
+echo
+echo "--- mbsync ---"
+sync_ok=0
+sync_fail=0
+for ch in $CHANNELS; do
+    if [ "$ch" = "proton" ] && ! pgrep -f protonmail-bridge >/dev/null 2>&1; then
+        echo "  WARN: Proton Bridge not running — skipping proton"
+        continue
+    fi
+    printf '  syncing %-16s ... ' "$ch"
+    if mbsync -c "$SYNC_CONF" "$ch" >/dev/null 2>&1; then
+        echo "OK"
+        sync_ok=$((sync_ok + 1))
+    else
+        echo "FAILED"
+        sync_fail=$((sync_fail + 1))
+    fi
+done
+echo "  (ok: $sync_ok, failed: $sync_fail)"
+
+# ---------- 2. notmuch: index ----------
+echo
+echo "--- notmuch new ---"
+index_ok=0
+for acct in $INDEX_ACCOUNTS; do
+    printf '  indexing %-8s ... ' "$acct"
+    nm_out=$(NOTMUCH_CONFIG="$NM_CONF_DIR/$acct/config" notmuch new 2>&1)
+    if [ $? -eq 0 ]; then
+        echo "OK"
+        echo "$nm_out" | grep -v '^$' | sed 's/^/    /'
+        index_ok=$((index_ok + 1))
+    else
+        echo "FAILED"
+        echo "$nm_out" | sed 's/^/    /'
+    fi
+done
+
+# ---------- 3. abook: rebuild contacts ----------
+echo
+echo "--- abook contacts ---"
+
+# Initialize abook only if absent; never clobber existing data.
+if [ ! -f "$ABOOK_RC" ]; then
+    printf '# abook config (managed by mailsync)\n[options]\nautosave=true\n' > "$ABOOK_RC"
+    echo "  created $ABOOK_RC"
+fi
+if [ ! -f "$ABOOK_DB" ]; then
+    printf '# abook addressbook file\n\n[format]\nprogram=abook\nversion=0.6.2\n' > "$ABOOK_DB"
+    echo "  created $ABOOK_DB"
+fi
+
+# harvest: emit "Name <email>" (or bare "<email>") lines from an account's db
+harvest() {
+    NOTMUCH_CONFIG="$NM_CONF_DIR/$1/config" notmuch address --output=sender "$2" 2>/dev/null
+}
+
+# "Name <email>" lines -> tab pairs "email\tname"; dedupe by email, keep longest name
+to_pairs() {
+    grep -viE "$OWN_ADDRESSES" | awk -F'[<>]' '
+    {
+        if ($2 != "") { email = $2; name = $1 }
+        else          { email = $0; name = "" }
+        gsub(/^[ \t]+|[ \t]+$/, "", email)
+        gsub(/^[ \t]+|[ \t]+$/, "", name)
+        gsub(/^"|"$/, "", name)
+        if (email !~ /@/) next
+        if (!(email in seen) || length(name) > length(seen[email])) seen[email] = name
+        if (!(email in order)) order[email] = ++n
+    }
+    END { for (e in order) printf "%s\t%s\n", e, seen[e] }
+    '
+}
+
+harvest_tmp="$(mktemp /tmp/mailsync-harvest.XXXXXX)"
+
+for acct in $CONTACT_ACCOUNTS; do
+    q="$PHIL_QUERY"; [ "$acct" = "proton" ] && q="$PROTON_QUERY"
+    printf '  harvesting %-8s ... ' "$acct"
+    n=$(harvest "$acct" "$q" | wc -l)
+    echo "$n sender lines"
+    harvest "$acct" "$q" | to_pairs >> "$harvest_tmp"
+done
+
+# existing entries (email\tname) parsed straight from the current datafile
+existing_tmp="$(mktemp /tmp/mailsync-existing.XXXXXX)"
+awk '/^name=/{n=substr($0,6)} /^email=/{e=substr($0,7); if (e != "") printf "%s\t%s\n", e, n}' \
+    "$ABOOK_DB" | sort > "$existing_tmp"
+
+# union: existing entries win (manual edits preserved); add harvested ones not present
+merge_tmp="$(mktemp /tmp/mailsync-merge.XXXXXX)"
+awk -F'\t' '
+    NR==FNR { if ($1 != "") existing[$1] = $2; next }
+    { if (!($1 in existing)) new[$1] = $2; ++m; ord[m] = $1 }
+    END {
+        for (e in existing) printf "%s\t%s\n", existing[e], e
+        for (k = 1; k <= m; k++) { e = ord[k]; if (e in new) printf "%s\t%s\n", new[e], e }
+    }' "$existing_tmp" "$harvest_tmp" \
+    | awk -F'\t' '!seen[$2]++' \
+    | sort -t$'\t' -k1,1 > "$merge_tmp"
+
+# write final native-format abook file atomically (only after validation passes)
+final_tmp="$(mktemp /tmp/mailsync-abook.XXXXXX)"
+{
+    echo "# abook addressbook file"
+    echo ""
+    echo "[format]"
+    echo "program=abook"
+    echo "version=0.6.2"
+    echo ""
+    n=0
+    while IFS=$'\t' read -r name email; do   # merge_tmp is "name\temail"
+        [ -z "$email" ] && continue
+        printf '[%d]\nname=%s\nemail=%s\n\n' "$n" "$name" "$email"
+        n=$((n + 1))
+    done < "$merge_tmp"
+} > "$final_tmp"
+
+count=$(awk '/^\[[0-9]+\]/{c++} END{print c+0}' "$final_tmp")
+if abook --convert --informat abook --outformat mutt --infile "$final_tmp" --outfile /dev/null >/dev/null 2>&1; then
+    [ -f "$ABOOK_DB.pre-mailsync" ] || cp "$ABOOK_DB" "$ABOOK_DB.pre-mailsync" 2>/dev/null
+    mv "$final_tmp" "$ABOOK_DB"
+    echo "  abook updated: $count contacts ($(awk -F'\t' '{c++} END{print c}' "$existing_tmp") kept, $(awk -F'\t' '{c++} END{print c}' "$merge_tmp") total)"
+else
+    echo "  ERROR: generated abook file failed validation — keeping existing datafile"
+    rm -f "$final_tmp"
+fi
+
+rm -f "$harvest_tmp" "$existing_tmp" "$merge_tmp"
+
+# ---------- summary ----------
+echo
+echo "=== mailsync finished: $(date '+%Y-%m-%d %H:%M:%S') (sync ok=$sync_ok fail=$sync_fail, index ok=$index_ok) ==="
+
+# keep the aerc terminal open so output can be read
+if [ -t 1 ]; then
+    printf 'Done. Press any key to close...'
+    read -n 1 -s -r
+    echo
+fi

ssh/.ssh/config

@@ -23,8 +23,8 @@ Host code
   IdentityFile ~/.ssh/keys/code_ed25519
 
 Host mail
-  HostName 100.79.210.76
+  # HostName 100.79.210.76
-  # HostName 100.69.37.217
+  HostName 100.69.37.217
   port 50105
   User liph
   IdentityFile ~/.ssh/keys/mail_ed25519

systemd/.config/systemd/user/mailsync-login.timer

@@ -0,0 +1,9 @@
+[Unit]
+Description=Run mailsync 2 minutes after login (safety catch-up run)
+
+[Timer]
+OnStartupSec=2min
+Unit=mailsync.service
+
+[Install]
+WantedBy=timers.target

systemd/.config/systemd/user/mailsync.service

@@ -0,0 +1,6 @@
+[Unit]
+Description=Mail sync (mbsync + notmuch index + abook contacts)
+
+[Service]
+Type=oneshot
+ExecStart=%h/.local/bin/mailsync

systemd/.config/systemd/user/mailsync.timer

@@ -0,0 +1,12 @@
+[Unit]
+Description=Run mailsync every day at 08:00, 12:00 and 17:00
+
+[Timer]
+OnCalendar=*-*-* 08:00:00
+OnCalendar=*-*-* 12:00:00
+OnCalendar=*-*-* 17:00:00
+Persistent=true
+Unit=mailsync.service
+
+[Install]
+WantedBy=timers.target